Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. A722-802 specification
The distance measured in a straight line from the bottom to the top of an item.
0.1230in. and 0.1250in.
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.
0.3085in. and 0.3105in.
The length of a straight line which passes through the center of the smallest diameter of a bore,and terminates at the circumference.
0.1270in.
0.1290in.
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.
ground
The means used in manufacturing the retainer.
machined
Indicates the type of alignment utilized whereby the item will adjust axially for misalignment.
rigid
A designation of the directional operating capability of the item.
single
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.
abec no.5
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
ring and balls C56.0 to C64.0 rockwell hardness
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 440c ball
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 440c inner ring
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 440c outer ring
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp 630 retainer
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
aisi 440c assn std single material response ball
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
aisi 440c assn std single material response inner ring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
aisi 440c assn std single material response outer ring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ms 5643 assn std single material response retainer
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
grooved race surface
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
73030-599242-3 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Answers.
1EA
Grooved race surface
Steel comp 630 retainer
Steel comp 440c outer ring
Steel comp 440c inner ring
Steel comp 440c ball
Schedule B number: 8482105008
nmfc 114820
Thrust ball bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
NSN 3110-01-088-2023 BEARING,BALL,THRUST
grooved race surface ring
- NIIN
- 010882023
- NIIN Date
- 01/08/80
- Schedule B
- 8482105008
- Name Code
- 00019
- FIIG
- A044A0
- QUP
- 1
- Historical Price
- $383.18 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 599242-3 | Cage 40920 |
| 2. | 599242-3 | Cage 99207 |
| 3. | 599242-3 | Cage 99167 |
| 4. | 599242-3 | Cage 73030 |
Major End Users Countries and entities
- - Department of The Army
- - Department of The Navy
- - Australia
- - Turkey
Availability for A722-802 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114820 BEARINGS/BUSHINGS NOI BALL/ROLLER
- UFC (universal freight code)
- 58860
Similar by Design Other bearings with similar characteristics
Nothing similar to this part number was found in our inventory
A722-802 / Bearing,ball,thrustWhat is the formal definition of this item?
An antifriction bearing having a ball rolling element, designed to resist axial thrust, or to support an axial load. excludes bearing, ball, pivot.
