Serving our customers with quality and safety first.
3b
RIGHT-Hand
0.4370in.
internally threaded w/hexagon end
1.7650in. ⁓1-49/64"
0.1900in.
grease
0.8125in.
0.3280in.
0.4370in.
1.3750in.
2
contact
SELF-Aligning
0.4370in. ⁓7/16"
24
0.312in. ⁓5/16"
10.00 degrees
prelubricated with 40 to 50 percent of specified grease; max no. load starting torque 0.6400 oz; bearing shall conform to general dynamics f. w. spec c 3116; drill hole no. 50 drill; thru shank parallel with bore 0.3125 in. from shank end; mill slot in shank end parallel with bore 0.0610 in. deep by 0.0700 in. wide and 0.0004 in. radial clearance
MIL-G-23827 mil spec single material response
steel ball
rubber synthetic seal
steel inner ring
steel outer ring
steel shaft
cadmium
double row, staggered, ball
unf
Unf
Double row, staggered, ball
Steel shaft
Steel outer ring
Steel inner ring
Rubber synthetic seal
Steel ball
24
Right-hand
3b
Schedule B number: 8482800080
nmfc 114820
Other ball or roller bearings, including combined ball/roller bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
unf thread series double row, staggered, ball cadmium surface treated prelubricated with 40 to 50 percent of specified grease; max no. load starting torque 0.6400 oz; bearing shall conform to general dynamics f. w. spec c 3116; drill hole no. 50 drill; thru shank parallel with bore 0.3125 in. from shank end; mill slot in shank end parallel with bore 0.0610 in. deep by 0.0700 in. wide 24 thread quantity per inch 0.1900" bore diameter 1.7650" overall length right-hand 3b thread class
1. | RAP3F5-2E9107A | Cage 21335 |
2. | C3116-3F5 | Cage 81755 |
Nothing similar to this part number was found in our inventory
A special single or multiple-row ball bearing, rigid or self-aligning, and constructed with either a solid or hollow shank, internally or externally threaded.