L5873410-001 Ball Rod End Bearing

Datasheet. L5873410-001 specification

Thread Class
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.

Thread Pitch Diameters
The minimum and maximum pitch diameter limits of a straight screw thread.

+0.3394/+0.3425in.

Thread Direction
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.

RIGHT-Hand

Shank Diameter
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.

0.3750in.

Shank Style
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.

externally threaded w/slot

Overall Length
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

3.1000in. ⁓3-7/64"

Bore Diameter
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.

0.3120in. and 0.3125in.

Lubrication Material
The element,compound,or mixture with which the item is lubricated.

grease

Shank Thread Length

1.3750in.

Outer Ring Width

0.4430in. and 0.4530in.

Inner Ring Width

0.8070in. and 0.8120in.

Length From Bore Center To Shank End

2.3500in.

Retainer Fabrication Method
The means used in manufacturing the retainer.

pressed

Seal Quantity
The number of seals included on the item.

Shield Quantity
The number of shields included on the item.

Bearing Seal Type
Indicates the type of seal provided with the bearing.

contact

Alignment Type
Indicates the type of alignment utilized whereby the item will adjust axially for misalignment.

SELF-Aligning

Self-alignment Location
Indicates the location of the self-alignment feature.

internal

Internal Clearance
The clearance between the bearing rings and the rolling elements.

0.0000in. radial and 0.0010in. radial

Thread Quantity Per Inch
The number of threads on the item per linear inch measured on a line parallel to the thread axis.

Nominal Thread Size
A designation that is used for the purpose of general identification of the thread.

0.3750in. ⁓3/8"

Lubrication Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.

MIL-G-81322 mil spec single material response

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

plastic polytetrafluoroethylene seal

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E52100 ball

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E52100 inner ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp XM-13 rod end body

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel corrosion resisting retainer

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 3652 assn std single material response seal

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

FED-STD-66 fed std single material response inner ring

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

FED-STD-66 fed std single material response ball

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium inner race bore

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, type 1, class 2 fed spec single treatment response inner ring

Style Designator
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

double row, staggered, ball

Answers.

What quantity is this sold in?

1EA

What is the style?

Double row, staggered, ball