Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 6802-3 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The length of a straight line which passes through the center of the body of the shank and terminates at the circumference.
0.3750in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shank.
externally threaded
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.9690in. ⁓1-31/32"
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.
0.2500in.
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.
0.9280in. and 0.9480in.
The element,compound,or mixture with which the item is lubricated.
grease
0.6250in.
0.4280in. and 0.4480in.
0.5880in. and 0.5930in.
1.5000in.
The number of seals included on the item.
2
Indicates the type of seal provided with the bearing.
contact
Indicates the type of alignment utilized whereby the item will adjust axially for misalignment.
SELF-Aligning
Indicates the location of the self-alignment feature.
internal
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
24
A designation that is used for the purpose of general identification of the thread.
0.3750in. ⁓3/8"
10.00 degrees
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
made from MS21151-8G; shank end chamfered; straight knurl over threads at neck
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.
MIL-G-23827 mil spec single material response
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp E52100 ballsteel comp E52100 inner ringsteel comp 4130 outer ring or steel comp 8620 outer ringplastic polytetrafluoroethylene seal and steel comp 301 seal
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-S-7420 mil spec single material response ball and aisi assn std single material response BALLMIL-S-7420 mil spec single material response inner ring and aisi assn std single material response inner RINGMIL-S-6758 mil spec 1st material response outer ring or MIL-S-8690 mil spec 2nd material response outer ring or aisi assn std all material responses outer ringams 3625 assn std 1st material response seal or ams 3666 assn std 1st material response seal and aisi assn std 2nd material response seal
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium exposed surfaces as mounted and chromate exposed surfaces as mounted
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.
QQ-P-416, type 2, class 2 fed spec single treatment response exposed surfaces as mounted
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
double row, staggered, ball
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unf
Answers.
Unf
Double row, staggered, ball
Steel comp e52100 ballsteel comp e52100 inner ringsteel comp 4130 outer ring or steel comp 8620 outer ringplastic polytetrafluoroethylene seal and steel comp 301 seal
24
Right-hand
3a
Schedule B number: 8482800080
Other ball or roller bearings, including combined ball/roller bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
NSN 3110-01-341-5689 BEARING,BALL,ROD END
unf thread series double row, staggered, ball cadmium exposed surfaces as mounted surface treated made from MS21151-8g; shank end chamfered; straight knurl over threads at neck 24 thread quantity per inch 0.2500" bore diameter 1.9690" overall length right-hand 3a thread class
- NIIN
- 013415689
- NIIN Date
- 07/01/91
- Schedule B
- 8482800080
- Name Code
- 00049
- FIIG
- A044A0
- QUP
- Historical Price
- $333.70 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Air Force
Availability for 6802-3 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other bearings with similar characteristics
Nothing similar to this part number was found in our inventory
6802-3 / Bearing,ball,rod endWhat is the formal definition of this item?
A special single or multiple-row ball bearing, rigid or self-aligning, and constructed with either a solid or hollow shank, internally or externally threaded.
