T543

T543 Ball Duplex Bearing

Home » Catalog » Bearings (p. 1434) » Ball Duplex Bearings (p. 7) » Part Number T543

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Quality Commitment

Serving our customers with quality and safety first.

AS9120 Certified
Audited supply chain
ITAR Registered
DDTC Registered
HAZMAT Certified
Customer service objectives
Every product 100% inspected

Datasheet. T543 specification

Overall Width
An overall measurement taken at right angles to the length of an item,in distinction from thickness.

0.6040in. and 0.6240in.

Bore Diameter
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.

3.0622in. and 3.0625in.

Overall Outside Diameter
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.

3.8746in. and 3.8750in.

Lubrication Material
The element,compound,or mixture with which the item is lubricated.

oil

Surface Finish
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.

ground

Retainer Fabrication Method
The means used in manufacturing the retainer.

pressed

Shield Quantity
The number of shields included on the item.

Load Direction
The direction of load with respect to the shaft axis.

angular

Standard Tolerance Designation
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.

abec no. 5t

Bearing Preload Rating
The amount of internal loading in a bearing which is independent of any external radial and/or axial load.

90.0 pounds and 110.0 pounds

Contact Angle
The size of the angle formed at the force point of contact.

15.0 degrees and 25.0 degrees

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

vacuum impregnate retainer with specified oil, centrifuge for 2 minutes at 100 g after vacuum; inscribe match mark on od of each bearing; one shield each bearing

Lubrication Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.

MIL-L-6085 mil spec single material response

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

cotton retainer and plastic phenolic retainer

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 440c ball

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 440c inner ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 440c outer ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel corrosion resisting shield

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

MIL-P-79, type fbe mil spec single material response retainer

Style Designator
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

92b counterbored outer rings, NON-Separable, back to back mounting

Specification/standard Data
The document designator of the specification or standard which established the item of supply.

82577-901861 manufacturers standard

Answers.

What quantity is this sold in?

1EA

What is the style?

92b counterbored outer rings, non-separable, back to back mounting