30.0mm overall width 40.0mm bore diameter bearings stabilized for operationfrom m 65 to p 300 deg f, inner 92c counterbored outer rings, non-separable, face to face mounting
17.0mm overall width 35.00mm bore diameter back to back, face to face or tandem mounting, 12.0 deg angularity 90a universal ground faces, counterbored outer ring, non-separable
0.5000" overall width 2.0625" bore diameter ball separator consists of toroids around alternate balls 92b counterbored outer rings, non-separable, back to back mounting
0.3125" overall width 0.3750" bore diameter two drops of specified lubricant in each bearing using a no. 26 hypodermic needle 92b counterbored outer rings, non-separable, back to back mounting
0.3125" overall width 0.5000" bore diameter two drops of specified lubricant in each bearing using a no. 26 hypodermic neelle 92b counterbored outer rings, non-separable, back to back mounting
84.0mm overall width 140.00mm bore diameter over 25.0 deg angularity, inner ring to show high point of eccentricity 92c counterbored outer rings, non-separable, face to face mounting
26.00mm overall width 2.1633" bore diameter first radial clearance w/10 lb gage, second radial clearance w/11 lb gage load, rings magnaflux 100 pct per ams 2640, etch v on outside of both outer rings when mounted face to face 92c counterbored outer rings, non-separable, face to face mounting
16.0mm overall width 10.0mm bore diameter bearings stabilized for operationat m 65 to p 250 deg f, lubrication quantity 30 to 50 pct full 92a non-loading groove, non-separable, tandem mounting
