Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 205-040-106 specification
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
30.0 mm
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.
40.0 mm
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.
68.0 mm
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.
ground
The means used in manufacturing the retainer.
machined
The direction of load with respect to the shaft axis.
angular
The designation specifying the type of fit as recognized by industrial and governmental agencies.
standard
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.
abec no.3
The amount of internal loading in a bearing which is independent of any external radial and/or axial load.
40.0 pounds
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
bearings stabilized for operationfrom m 65 to p 300 deg f, inner and outer races flush within 0.0005 in. when preloaded, bearings marked w/same serial no.
The chemical compound or mechanical mixture properties of which the item is fabricated.
copper alloy retainer
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp E52100 ball
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp E52100 inner ring
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp E52100 outer ring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
205-040-106, 97499 mfr ref single material response retainer
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
FED-STD-66 fed std single material response inner ring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
FED-STD-66 fed std single material response ball
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
FED-STD-66 fed std single material response outer ring
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
92c counterbored outer rings, NON-Separable, face to face mounting
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
38443-AQCP-2 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) . and 38443-AQCP-9A specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) . and 38443-AIS-84A specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) . and 21335-APS-33A specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) . and 21335-APS-36A specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
Answers.
1PR
92c counterbored outer rings, non-separable, face to face mounting
Steel comp e52100 outer ring
Steel comp e52100 inner ring
Steel comp e52100 ball
Copper alloy retainer
30.0 millimeters
Schedule B number: 8482105068
nmfc 114820
Ball bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
NSN 3110-00-052-9135 BEARING,BALL,DUPLEX
92c counterbored outer rings, non-separable, face to face mounting bearings stabilized for operationfrom m 65 to p 300 deg f, inner 40.0mm bore diameter 30.0mm overall width
- NIIN
- 000529135
- NIIN Date
- 01/01/63
- Schedule B
- 8482105068
- Name Code
- 30213
- FIIG
- A044A0
- QUP
- 1
- Historical Price
- $1,904.25 PR
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 3M9108WIMBRDUA1076 | Cage 21335 |
| 2. | 7108KRDF | Cage 38443 |
| 3. | 205-040-106-1 | Cage 97499 |
Major End Users Countries and entities
- - Department of The Army
- - Department of The Air Force
- - Brazil
- - Spain
- - New Zealand
- - Germany
- - Republic of Korea
- - Greece
- - Turkey
Availability for 205-040-106 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114820 BEARINGS/BUSHINGS NOI BALL/ROLLER
- UFC (universal freight code)
- 58860
Similar by Design Other bearings with similar characteristics
Nothing similar to this part number was found in our inventory
205-040-106 / Bearing,ball,duplexWhat is the formal definition of this item?
Two single row annular ball bearings selected dimensionally to be a matched pair or set. the ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. may include a single row angular contact bearing with faces specially ground for duplex mounting.
