Serving our customers with quality and safety first.
0.2500in.
0.2500in.
0.3750in.
oil
ground
pressed
8
contact
radial
abec no. 5p
each bearing shall be lubricated with one drop from a no. 26 needle using lowgassing oil, brayco 815z
brayco 8152, cagec 33032 assn std single material response
plastic polyamide retainer
steel comp 302 shield
steel comp 440c ball
steel comp 440c inner ring
steel comp 440c outer ring
ams 5516 assn std single material response shield
L-P-410 mfr ref single material response retainer
QQ-S-763 fed spec single material response ball
QQ-S-763 fed spec single material response inner ring
QQ-S-763 fed spec single material response outer ring
passivate ball
passivate inner ring
passivate outer ring
passivate shield
ASTM-A380 assn std single treatment response ball
ASTM-A380 assn std single treatment response inner ring
ASTM-A380 assn std single treatment response outer ring
ASTM-A380 assn std single treatment response shield
92g NON-Loading groove, NON-Separable, back to back mounting
92g non-loading groove, non-separable, back to back mounting
Steel comp 440c outer ring
Steel comp 440c inner ring
Steel comp 440c ball
Steel comp 302 shield
Plastic polyamide retainer
0.2500 inches
Schedule B number: 8482105068
nmfc 114820
Ball bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
92g non-loading groove, non-separable, back to back mounting passivate shield surface treated each bearing shall be lubricated with one drop from a no. 26 needle using lowgassing oil, brayco 815z 0.2500" bore diameter 0.2500" overall width
1. | 717801969-001 | Cage 04939 |
Nothing similar to this part number was found in our inventory
Two single row annular ball bearings selected dimensionally to be a matched pair or set. the ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. may include a single row angular contact bearing with faces specially ground for duplex mounting.