P136 Ball Duplex Bearing

Datasheet. P136 specification

Overall Width
An overall measurement taken at right angles to the length of an item,in distinction from thickness.

0.2500in.

Bore Diameter
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.

0.1875in.

Overall Outside Diameter
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.

0.3125in.

Lubrication Material
The element,compound,or mixture with which the item is lubricated.

lubricating oil

Surface Finish
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.

ground

Retainer Fabrication Method
The means used in manufacturing the retainer.

pressed

Seal Quantity
The number of seals included on the item.

Shield Quantity
The number of shields included on the item.

Bearing Seal Type
Indicates the type of seal provided with the bearing.

contact

Load Direction
The direction of load with respect to the shaft axis.

radial

Bearing Preload Designation
The designation specifying the type of internal loading in a bearing which is independent of any external radial and/or axial load.

light

Internal Clearance
The clearance between the bearing rings and the rolling elements.

0.0005in. radial and 0.0008in. radial

Standard Tolerance Designation
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.

abec no. 5p

Bearing Preload Rating
The amount of internal loading in a bearing which is independent of any external radial and/or axial load.

2.5 pounds

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

pair of bearings flush ground for duplex mounting w/shielded sides together, eccentrically matched and marked at the outer ring

Lubrication Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.

MIL-L-6085 mil spec single material response

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

rubber BUTADIENE-Acrylonitrile class nbr seal

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 440c ball

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 440c inner ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 440c outer ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 410 retainer

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel corrosion resisting shield

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

66 fed std single material response retainer

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

66 fed std single material response ball

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

66 fed std single material response inner ring

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

66 fed std single material response outer ring

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

aisi 3000 assn std single material response shield

Style Designator
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

92a NON-Loading groove, NON-Separable, tandem mounting

Answers.

What quantity is this sold in?

1EA

What is the style?

92a non-loading groove, non-separable, tandem mounting