Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. AAMM213-3SMBRDTE7103 specification
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
1.7910in. and 1.8110in.
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.
2.5589in. and 2.5591in.
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.
4.7241in. and 4.7244in.
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.
ground
The means used in manufacturing the retainer.
machined
The direction of load with respect to the shaft axis.
radial
The clearance between the bearing rings and the rolling elements.
0.0033in. radial and 0.0043in. radial
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.
abec no.7
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
stabilized for operation from M65 deg f to P600 deg f, C60.0 to C64.0 rockwell hardness o/a, thrust marking v etched on bore of inner ring
The chemical compound or mechanical mixture properties of which the item is fabricated.
copper alloy retainer
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel ball
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel inner ring
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel outer ring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
-4001, 91547 mfr ref single material response ball
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
-4001, 91547 mfr ref single material response inner ring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
-4001, 91547 mfr ref single material response outer ring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
ams 4616 assn std single material response retainer
An indication of the precious material and its location in the item.
retainer silver
Identification of the precious material contained in the item.
silver
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
92a NON-Loading groove, NON-Separable, tandem mounting
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
+6903-91547 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
Answers.
92a non-loading groove, non-separable, tandem mounting
Steel outer ring
Steel inner ring
Steel ball
Copper alloy retainer
1.7910 inches minimum and 1.8110 inches maximum
Schedule B number: 8482105068
nmfc 114820
Ball bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
NSN 3110-00-179-7323 BEARING,BALL,DUPLEX
92a non-loading groove, non-separable, tandem mounting stabilized for operation from M65 deg f to P600 deg f, C60.0 to C64.0 rockwell hardness o/a, thrust marking v etched on bore of inner ring 2.5589" bore diameter 1.7910" overall width
- NIIN
- 001797323
- NIIN Date
- 03/19/69
- Schedule B
- 8482105068
- Name Code
- 30213
- FIIG
- A044A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Contains silver
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Israel
- - Malaysia
- - Canada
Availability for AAMM213-3SMBRDTE7103 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114820 BEARINGS/BUSHINGS NOI BALL/ROLLER
- UFC (universal freight code)
- 58860
Similar by Design Other bearings with similar characteristics
Nothing similar to this part number was found in our inventory
AAMM213-3SMBRDTE7103 / Bearing,ball,duplexWhat is the formal definition of this item?
Two single row annular ball bearings selected dimensionally to be a matched pair or set. the ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. may include a single row angular contact bearing with faces specially ground for duplex mounting.
