Serving our customers with quality and safety first.
0.6100in. and 0.6250in.
6.4990in. and 6.5000in.
7.1238in. and 7.1250in.
ground
pressed
angular
50.0 pounds
0.0000 to 0.0010 in. space between inner ring faces under 50 lb load, etch v on bore and od to indicate proper installation position
steel ball
steel corrosion resisting retainer
steel inner ring
steel outer ring
special quality control testing
92b counterbored outer rings, NON-Separable, back to back mounting
81349-MIL-P-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
1PR
92b counterbored outer rings, non-separable, back to back mounting
Steel outer ring
Steel inner ring
Steel corrosion resisting retainer
Steel ball
0.6100 inches minimum and 0.6250 inches maximum
Schedule B number: 8482105068
nmfc 114820
Ball bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
92b counterbored outer rings, non-separable, back to back mounting 0.0000 to 0.0010 in. space between inner ring faces under 50 lb load, etch v on bore 6.4990" bore diameter 0.6100" overall width
1. | 7178-1 | Cage 32828 |
Nothing similar to this part number was found in our inventory
Two single row annular ball bearings selected dimensionally to be a matched pair or set. the ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. may include a single row angular contact bearing with faces specially ground for duplex mounting.