203-036-0002 Ball Duplex Bearing

Datasheet. 203-036-0002 specification

Overall Width
An overall measurement taken at right angles to the length of an item,in distinction from thickness.

0.7200in. and 0.7500in.

Bore Diameter
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.

3.9997in. and 4.0000in.

Overall Outside Diameter
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.

4.6247in. and 4.6250in.

Lubrication Material
The element,compound,or mixture with which the item is lubricated.

grease

Surface Finish
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.

ground

Retainer Fabrication Method
The means used in manufacturing the retainer.

machined

Seal Quantity
The number of seals included on the item.

Bearing Seal Type
Indicates the type of seal provided with the bearing.

contact

Load Direction
The direction of load with respect to the shaft axis.

angular

Internal Fit-up Designation
The designation specifying the type of fit as recognized by industrial and governmental agencies.

standard

Contact Angle
The size of the angle formed at the force point of contact.

30.0 degrees

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

etch v on bores and od of bearings at high points of radial runout, 0.0003 radial runout inner ring, 0.0004 radial runout outer ring; kaydon precision cass 4, fscm 32828

Lubrication Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.

MIL-G-23827 mil spec single material response

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

plastic phenolic retainer

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

rubber BUTADIENE-Acrylonitrile class nbr seal and plastic phenolic seal

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E52100 ball

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E52100 inner ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E52100 outer ring

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

aisi assn std single material response ball

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

aisi assn std single material response inner ring

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

aisi assn std single material response outer ring

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

varnish retainer

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

varnish seal

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

MIL-V-173 mil spec single treatment response retainer

MIL-V-173 mil spec single treatment response seal

Style Designator
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

92b counterbored outer rings, NON-Separable, back to back mounting

Test Data Document
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

32828-63-44-24-1-2 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .

Answers.

What quantity is this sold in?

1PR

What is the style?

92b counterbored outer rings, non-separable, back to back mounting