Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 20208-L3C(DT) specification
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
1.4074in. and 1.4174in.
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.
1.5745in. and 1.5748in.
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.
3.1492in. and 3.1496in.
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.
ground
The direction of load with respect to the shaft axis.
angular
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
zzzy
The chemical compound or mechanical mixture properties of which the item is fabricated.
copper alloy retainer
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp E52100 ball
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp E52100 inner ring
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp E52100 outer ring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
66 fed std single material response ball
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
66 fed std single material response inner ring
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.
special quality control testing
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
92d counterbored outer rings, NON-Separable, tandem mounting
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-P-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.
as differentiated by material which must conform to ships parts control center special quality control provisions and certified free from mercury contamination
Answers.
1PR
92d counterbored outer rings, non-separable, tandem mounting
Steel comp e52100 outer ring
Steel comp e52100 inner ring
Steel comp e52100 ball
Copper alloy retainer
1.4074 inches minimum and 1.4174 inches maximum
Schedule B number: 8482105068
nmfc 114820
Ball bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
NSN 3110-01-117-5127 BEARING,BALL,DUPLEX
92d counterbored outer rings, non-separable, tandem mounting 1.5745" bore diameter 1.4074" overall width
- NIIN
- 011175127
- NIIN Date
- 08/15/81
- Schedule B
- 8482105068
- Name Code
- 30213
- FIIG
- A044A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $329.93 PR
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 820-4551176-2 | Cage 80064 |
Major End Users Countries and entities
- - Department of The Navy
Availability for 20208-L3C(DT) A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114820 BEARINGS/BUSHINGS NOI BALL/ROLLER
- UFC (universal freight code)
- 58860
Similar by Design Other bearings with similar characteristics
Nothing similar to this part number was found in our inventory
20208-L3C(DT) / Bearing,ball,duplexWhat is the formal definition of this item?
Two single row annular ball bearings selected dimensionally to be a matched pair or set. the ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. may include a single row angular contact bearing with faces specially ground for duplex mounting.
