Serving our customers with quality and safety first.
0.8350in. and 0.8450in.
8.9993in. and 9.0000in.
9.7493in. and 9.7500in.
oil
ground
machined
2
lips turned inwardly
angular
standard
abec no.3
720.0 pounds and 880.0 pounds
30.0 degrees
passivate, QQ-P-35, rings and balls; 20 drops of specified lubricant fromno. 26 hypodermic needle
MIL-L-6085 mil spec single material response
plastic phenolic retainer
rubber chloroprene class cr seal
steel comp 440c ball
steel comp 440c inner ring
steel comp 440c outer ring
aisi assn std single material response ball
aisi assn std single material response inner ring
aisi assn std single material response outer ring
MIL-P-79, form t, type fbe mil spec single material response retainer
MIL-R-6855, class 2, type a mil spec single material response seal
92b counterbored outer rings, NON-Separable, back to back mounting
58260-13084019 government specification
1EA
92b counterbored outer rings, non-separable, back to back mounting
Steel comp 440c outer ring
Steel comp 440c inner ring
Steel comp 440c ball
Rubber chloroprene class cr seal
Plastic phenolic retainer
0.8350 inches minimum and 0.8450 inches maximum
Schedule B number: 8482105068
nmfc 114820
Ball bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
92b counterbored outer rings, non-separable, back to back mounting passivate, qq-p-35, rings 8.9993" bore diameter 0.8350" overall width
1. | 3TARZZ-144-156-4 | Cage 40920 |
2. | 13084019 | Cage 06144 |
3. | 13084019 | Cage 04939 |
4. | 13084019 | Cage 32828 |
5. | 13084019 | Cage 58260 |
Nothing similar to this part number was found in our inventory
Two single row annular ball bearings selected dimensionally to be a matched pair or set. the ring faces have been specially ground to specified offsets that will produce predetermined preload when mounted. may include a single row angular contact bearing with faces specially ground for duplex mounting.