Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. SCJT1 1/2 specification
A value which expresses the degree of heat or cold as applied to the operation,or limitation of operation,of an item.
163.0 deg celsius
The length of a straight line which passes through the center of a bolt circle,and terminates at the circumference.
5.656in.
A measurement of the smallest dimension of a flange,in distinction from length or width.
0.562in.
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.
0.516in.
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.
1.5000in.
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.
6.750in.
The length of a straight line which passes through the center of the housing, and terminates at the circumference.
4.125in.
A measurement of the longest dimension of the housing,in distinction from width.
1.031in.
Indicates the type of fitting used to lubricate the item.
hydraulic
The number of grooves in which the rolling element rides.
2
Indicates the type of alignment utilized whereby the item will adjust axially for misalignment.
SELF-Aligning
The designation specifying the type of fit as recognized by industrial and governmental agencies.
standard
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the assembly.
1.609in.
Indicates the type of seal included with the item.
contact
Indicates the type of block.
fixed
Indicates the type of shaft end provided.
open
Indicates the location of the seal.
both ends
Indicates the location of the collar.
one end
Indicates the type of load capability.
radial
The angle of the lubrication fitting from the horizontal centerline of the item.
0.0 degrees
The means of locking the rotating element of the bearing to the shaft.
setscrew locking collar
Indicates the type of mounting hole(s) provided on the item.
round, unthreaded
The chemical compound or mechanical mixture properties with which the item is lubricated.
grease
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.
ngli grades 0 thru 6 mil std single material response
The chemical compound or mechanical mixture properties of which the item is fabricated.
iron cast bearing
The chemical compound or mechanical mixture properties of which the item is fabricated.
iron cast housing
The chemical compound or mechanical mixture properties of which the item is fabricated.
rubber seal
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
flange block
Characteristics or qualities of an item,not covered in any other requirement,which are considered essential information for one or more functions excluding nsn assignment.
bearing p/n GYA108Rrb, housing p/n T-40106
Answers.
Flange block
Rubber seal
Iron cast housing
Iron cast bearing
Schedule B number: 8482991050
Parts, except inner and outer races, for ball bearings, (including ball bearings with integral shafts)
FSC 3130 ⁓ Bearings, mounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding antifriction bearings (fsc 3110); plain unmounted bearings (fsc 3120).
NSN 3130-01-274-6192 BEARING UNIT,BALL
flange block 1.031" housing length 1.5000" bore diameter
- NIIN
- 012746192
- NIIN Date
- 03/11/88
- Schedule B
- 8482991050
- Name Code
- 30556
- FIIG
- A093A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 107-5015 | Cage 63622 |
| 2. | SCJT-1 1/2 IN | Cage 21335 |
Major End Users Countries and entities
- - Canada
Availability for SCJT1 1/2 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other bearing units with similar characteristics
Nothing similar to this part number was found in our inventory
SCJT1 1/2 / Bearing unit,ballWhat is the formal definition of this item?
An assembled unit, composed of a housing incorporating a single or multiple row ball bearing(s), designed to meet various or specific conditions of mounting.
