206-001-185-1 Ball Bearing Unit

Datasheet. 206-001-185-1 specification

Mounting Hole Diameter
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.

0.2495in. and 0.2505in.

Bore Diameter
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.

0.2495in. and 0.2500in.

Center To Center Distance Between Mounting Holes Along Width
A measurement of the center to center distance between the mounting holes along the width.

1.055in. and 1.057in.

Overall Outside Diameter
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.

2.075in.

Housing Height

2.335in.

Alignment Type
Indicates the type of alignment utilized whereby the item will adjust axially for misalignment.

rigid

Internal Fit-up Designation
The designation specifying the type of fit as recognized by industrial and governmental agencies.

loose

Seal Type
Indicates the type of seal included with the item.

contact

Block Type
Indicates the type of block.

fixed

Shaft End Type
Indicates the type of shaft end provided.

open

Seal Location
Indicates the location of the seal.

both ends

Load Capability Type
Indicates the type of load capability.

radial

Height From Bottom Of Base To Bore Centerline

1.830in.

Rotating Element Locking Method
The means of locking the rotating element of the bearing to the shaft.

straight sleeve

Mounting Hole Type
Indicates the type of mounting hole(s) provided on the item.

round, unthreaded

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

2nd mtg hole 0.312 in. dia mi to 0.313 in. dia max

Lubrication Material
The chemical compound or mechanical mixture properties with which the item is lubricated.

grease

Lubrication Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.

MIL-G-81322 mil spec single material response

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

aluminum alloy 2014 housing

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E51100 ball or steel comp E52100 ball

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E52100 inner race

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E52100 outer ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel corrosion resisting seal and plastic polytetrafluoroethylene seal or steel corrosion resisting seal and glass fiber seal and plastic polytetrafluoroethylene seal

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

66 fed std all material responses ball

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

66 fed std single material response aligning ring

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

66 fed std single material response outer ring

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

ams 3652 assn std 1st material response seal or ams 3666 assn std 2nd material response seal

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

QQ-A-367, T6 fed spec single material response housing

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium inner race

Surface Treatment
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.

cadmium outer ring

Surface Treatment Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the surface treatment material.

QQ-P-416, type 1, class 2 fed spec single treatment response outer ring

QQ-P-416, type 1, class 2 fed spec single treatment response inner race

Test Data Document
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

97499-bps 4075 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .