Z995205 Ball Annular Bearing

Datasheet. Z995205 specification

Overall Width
An overall measurement taken at right angles to the length of an item,in distinction from thickness.

23.81 mm

Bore Diameter
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.

25.00 mm

Overall Outside Diameter
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.

52.00 mm

Lubrication Material
The element,compound,or mixture with which the item is lubricated.

grease

Surface Finish
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.

ground

Retainer Fabrication Method
The means used in manufacturing the retainer.

pressed

Seal Quantity
The number of seals included on the item.

Bearing Seal Type
Indicates the type of seal provided with the bearing.

contact

Load Direction
The direction of load with respect to the shaft axis.

angular

Bore Shape
The physical configuration of the bore.

straight

Internal Fit-up Designation
The designation specifying the type of fit as recognized by industrial and governmental agencies.

standard

Internal Fit-up Contact Angular Direction
The direction of the internal fit-up contact angle at point of contact.

outward convergent

Criticality Code Justification
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.

matt and spcl and feat

Standard Tolerance Designation
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.

abec no.1

Contact Angle
The size of the angle formed at the force point of contact.

25.0 degrees

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

certified free from mercury contamination

Lubrication Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.

MIL-G-18709 mil spec single material response

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

rubber synthetic seal

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel ball

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel inner ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel outer ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel retainer

Special Test Features
Test conditions and ratings,or environmental and performance requirements that are different,more critical,or more specific than those specified in a governing test data document.

special quality control testing

Style Designator
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

28a NON-Loading groove, NON-Separable

Test Data Document
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

81349-MIL-P-23199 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .

Reference Number Differentiating Characteristics
A feature of the item of supply which must be specifically recorded when the reference number covers a range of items.

as differentiated by material which must conform to ships parts control center special quality control provisions

Answers.

What quantity is this sold in?

1EA

What is the style?

28a non-loading groove, non-separable