Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. SR4FCHH5 specification
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
0.1950in. and 0.1960in.
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.
0.2498in. and 0.2500in.
The element,compound,or mixture with which the item is lubricated.
grease
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.
0.6890in. and 0.6900in.
A measurement taken at right angles to the length of a flange,in distinction from thickness.
0.0020in. and 0.0420in.
0.6248in. and 0.6250in.
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.
ground
The means used in manufacturing the retainer.
pressed
The number of shields included on the item.
2
The direction of load with respect to the shaft axis.
radial
The physical configuration of the bore.
straight
The clearance between the bearing rings and the rolling elements.
0.0001in. radial and 0.0008in. radial
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.
abec no. 5p
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
stabilized for operation at 500 deg f, packed 25 pct full w/lubricant
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.
MIL-G-23827 mil spec single material response
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel ball
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel inner ring
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel outer ring
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel retainer
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel shield
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
S313-13, 12511 mfr ref all material responses ball
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
S313-13, 12511 mfr ref all material responses inner ring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
S313-13, 12511 mfr ref all material responses outer ring
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
S313-13, 12511 mfr ref all material responses retainer
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
S313-13, 12511 mfr ref all material responses shield
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
NON-Loading groove, NON-Separable
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
12511-S313-13 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Answers.
1EA
Non-loading groove, non-separable
Steel shield
Steel retainer
Steel outer ring
Steel inner ring
Steel ball
0.1950 inches minimum and 0.1960 inches maximum
Schedule B number: 8482105028
nmfc 114820
Angular contact ball bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
NSN 3110-01-095-7682 BEARING,BALL,ANNULAR
non-loading groove, non-separable stabilized for operation at 500 deg f, packed 25 pct full w/lubricant 0.2498" bore diameter 0.1950" overall width
- NIIN
- 010957682
- NIIN Date
- 06/05/80
- Schedule B
- 8482105028
- Name Code
- 00014
- FIIG
- A044A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $17.25 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | SFR45PPK18/168 | Cage 83086 |
| 2. | SSRF-4ZZA5 | Cage S0352 |
| 3. | SFRA45PPK18/168 | Cage 83086 |
| 4. | S313-13 | Cage 40920 |
| 5. | S313-13 | Cage 59750 |
| 6. | S313-13 | Cage 83086 |
| 7. | S313-13 | Cage 12511 |
Major End Users Countries and entities
- - Department of The Army
- - Department of The Navy
- - Spain
- - Australia
- - Turkey
Availability for SR4FCHH5 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114820 BEARINGS/BUSHINGS NOI BALL/ROLLER
- UFC (universal freight code)
- 58860
Similar by Design Other bearings with similar characteristics
Nothing similar to this part number was found in our inventory
SR4FCHH5 / Bearing,ball,annularWhat is the formal definition of this item?
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. for items with faces specially ground for duplex mounting see bearing, ball, duplex. excludes bearing, ball, airframe.
