F173-830 Ball Annular Bearing

Datasheet. F173-830 specification

Overall Width
An overall measurement taken at right angles to the length of an item,in distinction from thickness.

0.2802in. and 0.2812in.

Bore Diameter
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.

0.3748in. and 0.3750in.

Lubrication Material
The element,compound,or mixture with which the item is lubricated.

oil

Flange Outside Diameter
The length of a straight line which passes through the center of the flange,and terminates at the outside circumference.

0.9680in. and 0.9690in.

Flange Width
A measurement taken at right angles to the length of a flange,in distinction from thickness.

0.0600in. and 0.0620in.

Outer Ring Outside Diameter

0.8748in. and 0.8750in.

Surface Finish
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.

ground

Retainer Fabrication Method
The means used in manufacturing the retainer.

pressed

Seal Quantity
The number of seals included on the item.

Shield Quantity
The number of shields included on the item.

Bearing Seal Type
Indicates the type of seal provided with the bearing.

contact

Load Direction
The direction of load with respect to the shaft axis.

radial

Bore Shape
The physical configuration of the bore.

straight

Internal Clearance
The clearance between the bearing rings and the rolling elements.

0.0003in. radial and 0.0005in. radial

Standard Tolerance Designation
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.

abec no. 7p

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

ribbon retainer; seal on the flanged side; shield opposite the flanged end

Lubrication Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.

MIL-L-6085 mil spec single material response

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

glass fiber seal and plastic seal

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 301 retainer or steel comp 302 retainer or steel comp 303 retainer or steel comp 304 retainer or steel comp 305 retainer

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 301 shield or steel comp 302 shield or steel comp 303 shield or steel comp 304 shield or steel comp 305 shield

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 440a ball

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 440a inner ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 440a outer ring

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

66 fed std single material response retainer

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

66 fed std single material response shield

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

aisi 440a assn std single material response ball

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

aisi 440a assn std single material response inner ring

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

aisi 440a assn std single material response outer ring

Style Designator
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

NON-Loading groove, NON-Separable

Answers.

What quantity is this sold in?

1EA

What is the style?

Non-loading groove, non-separable