Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 40294-1 specification
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
3.4170in. and 3.4370in.
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.
39.6200in.
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.
46.8720in. and 46.8750in.
The element,compound,or mixture with which the item is lubricated.
grease
The national stock number or the identification information of the end equipment for which the item is a part.
an/MST-Ti
2.5670in.
2.9700in.
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.
unground
The number of seals included on the item.
2
Indicates the type of seal provided with the bearing.
contact
The direction of load with respect to the shaft axis.
radial
The physical configuration of the bore.
straight
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
inner race bore is a spur gear, data is, 116 internal teeth, diam pitch 3, pressure angle 20 deg, pitch dia 38.666in. min 38.674 in. max, id 38.263 in. min 38.266 in. max, no backlash allow, agma quality no 0.004 tct with -A- 10, measure between wires 38.2217 in. min 38.2217 in. min 38.2297 in. max, wire diam 0.480, surface finish on active profile of gear 80 microinches; 2 lubrication fittings reqd at 180 deg apart including 1 in. loading plug, ALEMITE-1627B or equal
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.
MIL-G-23827 mil spec single material response
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel comp E52100 ball
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel inner race
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel outer race
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel spacer
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AISI1552 assn std 1st material response inner race
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
AISI1552 assn std 2nd material response outer race
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
counterbored outer ring, NON-Separable
Answers.
1EA
Counterbored outer ring, non-separable
Steel spacer
Steel outer race
Steel inner race
Steel comp e52100 ball
3.4170 inches minimum and 3.4370 inches maximum
Schedule B number: 8482105028
nmfc 114820
Angular contact ball bearings
FSC 3110 ⁓ Bearings, antifriction, unmounted
Note-this class includes bearings that generally have roller or balls confined by an inner and outer ring to relieve friction in/on/around rotating/moving mechanisms.
Excluding plain bearings (fsc 3120); jewel bearings (fsc 3120)
NSN 3110-01-127-4557 BEARING,BALL,ANNULAR
Used on an/mst-ti. counterbored outer ring, non-separable inner race bore is a spur gear, data is, 116 internal teeth, diam pitch 3, pressure angle 20 deg, pitch dia 38.666in. min 38.674 in. max, id 38.263 in. min 38.266 in. max, no backlash allow, agma quality no 0.004 tct with -a- 10, measure between wires 38.2217 in. min 38.2217 in. min 38.2297 in. max, wire diam 0.480, surface finish on active profile of gear 80 microinches; 2 lubrication fittings reqd at 180 deg apart including 1 in. loading plug, alemite-1627b or equal 39.6200" bore diameter 3.4170" overall width
- NIIN
- 011274557
- NIIN Date
- 03/02/82
- Schedule B
- 8482105028
- Name Code
- 00014
- FIIG
- A044A0
- QUP
- 1
- Historical Price
- $20,350.30 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Air Force DSOR Ogden air logistics complex (oo-alc), hill afb, ut
Availability for 40294-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114820 BEARINGS/BUSHINGS NOI BALL/ROLLER
- UFC (universal freight code)
- 58860
Similar by Design Other bearings with similar characteristics
Nothing similar to this part number was found in our inventory
40294-1 / Bearing,ball,annularWhat is the formal definition of this item?
A cylindrical device in which the inner or outer ring turns upon a single or double row of hardened balls which roll easily between the two rings, thus minimizing friction. for items with faces specially ground for duplex mounting see bearing, ball, duplex. excludes bearing, ball, airframe.
