34BSX21C0XORAV11G18 Ball Annular Bearing

Datasheet. 34BSX21C0XORAV11G18 specification

Overall Width
An overall measurement taken at right angles to the length of an item,in distinction from thickness.

0.2220in.

Bore Diameter
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.

0.1575in.

Overall Outside Diameter
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.

0.6299in.

Lubrication Material
The element,compound,or mixture with which the item is lubricated.

grease

Calibration Designator
The alpha or alpha-numeric symbol representing a specific calibration within a tolerance limit.

C0X

Surface Finish
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.

ground

Retainer Fabrication Method
The means used in manufacturing the retainer.

machined

Shield Quantity
The number of shields included on the item.

Load Direction
The direction of load with respect to the shaft axis.

angular

Bore Shape
The physical configuration of the bore.

straight

Internal Clearance
The clearance between the bearing rings and the rolling elements.

0.0008in. radial and 0.0016in. radial

Criticality Code Justification
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.

abmk and agyc and test

Contact Angle
The size of the angle formed at the force point of contact.

15.0 degrees

Lubrication Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.

unitemp 500, fscm 59595 mfr ref single material response

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

plastic phenolic retainer

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 302 shield

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E52100 ball

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E52100 inner ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp E52100 outer ring

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

aisi assn std single material response ball

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

aisi assn std single material response inner ring

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

aisi assn std single material response outer ring

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

aisi assn std single material response shield

Style Designator
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

shouldered inner ring, separable

Test Data Document
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

70854-ora specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) . or 70854-V11 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .