302PPFS160 Ball Annular Bearing

Datasheet. 302PPFS160 specification

Overall Width
An overall measurement taken at right angles to the length of an item,in distinction from thickness.

13.0 mm

Bore Diameter
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.

15.0 mm

Overall Outside Diameter
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.

42.0 mm

Lubrication Material
The element,compound,or mixture with which the item is lubricated.

grease

Surface Finish
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.

ground

Retainer Fabrication Method
The means used in manufacturing the retainer.

pressed

Seal Quantity
The number of seals included on the item.

Bearing Seal Type
Indicates the type of seal provided with the bearing.

contact

Load Direction
The direction of load with respect to the shaft axis.

radial

Bore Shape
The physical configuration of the bore.

straight

Internal Clearance
The clearance between the bearing rings and the rolling elements.

0.0001in. radial and 0.0007in. radial

Standard Tolerance Designation
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.

abec no.1

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

30 to 50 percent full of specified lubricant

Lubrication Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.

MIL-G-23827 mil spec single material response

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

rubber BUTADIENE-Acrylonitrile class nbr seal and steel seal

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 1010 ball or steel comp 1015 ball

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 1010 inner ring or steel comp 1015 inner ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 1010 outer ring or steel comp 1015 outer ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 1010 retainer or steel comp 1015 retainer

Style Designator
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

NON-Loading groove, NON-Separable