166572-10 Ball Annular Bearing

Datasheet. 166572-10 specification

Overall Width
An overall measurement taken at right angles to the length of an item,in distinction from thickness.

0.2812in.

Bore Diameter
The length of a straight line which passes through the center of a circular bore,and terminates at the circumference.

0.3750in.

Overall Outside Diameter
The overall length of a straight line which passes through the center of an item,and terminates at the outside circumference.

0.8750in.

Lubrication Material
The element,compound,or mixture with which the item is lubricated.

oil

Surface Finish
An additional finishing process by which the surface of an item is altered in respect to polishing,grinding,and the like.

ground

Retainer Fabrication Method
The means used in manufacturing the retainer.

pressed

Shield Quantity
The number of shields included on the item.

Load Direction
The direction of load with respect to the shaft axis.

radial

Bore Shape
The physical configuration of the bore.

straight

Internal Clearance
The clearance between the bearing rings and the rolling elements.

0.0040in. axial and 0.0003in. radial and 0.0005in. radial

Standard Tolerance Designation
The standard tolerance designation indicating the manufactured limitations of the item as established by the various specifications and standards.

abec no.5

Lubrication Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the lubrication material.

MIL-L-6085 mil spec single material response

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 440c ball

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 440c inner ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel comp 440c outer ring

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel corrosion resisting retainer

Material
The chemical compound or mechanical mixture properties of which the item is fabricated.

steel corrosion resisting shield

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

66 fed std single material response ball

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

66 fed std single material response inner ring

Material Document And Classification
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.

66 fed std single material response outer ring

Style Designator
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.

NON-Loading groove, NON-Separable

Test Data Document
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.

92739-13-185 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .

Answers.

What quantity is this sold in?

1EA

What is the style?

Non-loading groove, non-separable