NSN (National Stock Number)
4720-00-515-0314
4720005150314
Cross Sectional Shape
round
Inside Diameter
0.937in.
Tempurature Rating
-65.0 deg fahrenheit and 350.0 deg fahrenheit single response
Flange Thickness
0.297in. 1st end
Flange Thickness
0.297in. 2nd end
Outside Diameter
1.312in.
Minimum Inside Bending Radius
5.000in.
Angle Between Rigid Elbow Fittings In Deg
233.0
Center To Center Distance Between Bolt Holes Along Width
1.312in. 2nd end
Center To Center Distance Between Bolt Holes Along Width
1.656in. 1st end
Center To Center Distance Between Bolt Holes Along Length
1.312in. 2nd end
Center To Center Distance Between Bolt Holes Along Length
1.656in. 1st end
Bolt Hole Quantity
4 1st end
Bolt Hole Quantity
4 2nd end
Flange Length
1.750in. 2nd end
Flange Length
2.188in. 1st end
Flange Width
1.750in. 2nd end
Flange Width
2.188in. 1st end
Connection Style
raised swivel 1st end
Connection Style
raised swivel 2nd end
Bolt Hole Diameter
0.266in. and 0.276in. 1st end
Bolt Hole Diameter
0.266in. and 0.276in. 2nd end
Raised Face Height
0.015in. 1st end
Raised Face Height
0.015in. 2nd end
Raised Face Diameter
1.510in. 2nd end
Raised Face Diameter
1.854in. 1st end
End Flange Construction
solid 1st end
End Flange Construction
solid 2nd end
End Connection Design
elbow 1st end
End Connection Design
elbow 2nd end
Connection Type
raised face flange 1st end
Connection Type
raised face flange 2nd end
Burst Test Pressure
1200.0 pounds per square inch
Layer Composition And Location
outer layer braided corrosion resistant steel wire
Maximum Operating Pressure
300.0 pounds per square inch
Hydrostatic Test Pressure
600.0 pounds per square inch
Flow Angle
90.0 degrees 1st end
Flow Angle
90.0 degrees 2nd end
Outer Covering Environmental Protection
corrosion resistant
Inside Surface Condition
convoluted
Measuring Method And Length
37.750in. working and 38.250in. working
Flange Style
rectangular (includes square) 1st end
Flange Style
rectangular (includes square) 2nd end
Supplementary Features
this item has been reviewed for asbestos material. the current approved source, 1P322, has indicated their part number contained asbestos prior to 1984. they continue to manufacture the same part number without asbestos material after 1984