Serving our customers with quality and safety first.
0.384in. and 0.398in. ⁓13/32"
0.670in. and 0.692in.
0.032in. and 0.040in.
mrap RG-33
40.0 rockwell c and 50.0 rockwell c
steel comp 1050 or steel comp 1551 or steel comp 1059 or steel comp 1060 or steel comp 1561 or steel comp 1064
66 fed std all material responses
chromate
NAS-90725 national std/spec single treatment response
flat internal teeth
1HD
Flat internal teeth
Steel comp 1050 or steel comp 1551 or steel comp 1059 or steel comp 1060 or steel comp 1561 or steel comp 1064
0.032 inches minimum and 0.040 inches maximum
0.670 inches minimum and 0.692 inches maximum
0.384 inches minimum and 0.398 inches maximum
Schedule B number: 7318210000
nmfc 194160
Spring washers and other lock washers, iron or steel
FSC 5310 ⁓ Nuts and washers
Note-nuts and washers, including specially designed, are to be classified in this fsc. a. nuts are a small metal block made in a variety of shapes such as square and hexagonal which is drilled and internally threaded. b. washers are a perforated piece of metal, leather, or other materials of various shapes or forms. they are used primarily as a seat for a bolt, nut, screw, rivet or nail to distribute pressure and prevent endwise motion over an area and/or to prevent movement between two parts by means of restraining features created by the shape of its edges.
Excluding bearing thrust washers (fsc 3120); shims (fsc 5365); ring spacers (fsc 5365); plate spacers (fsc 5365); lock rings (fsc 5365).
Used on mrap rg-33. flat internal teeth chromate surface treated 0.032" material thickness 0.670" outside diameter 0.384" hole diameter
1. | 1220+00 | Cage 78189 |
2. | MILW6986 | Cage 81349 |
3. | 5962 | Cage 03476 |
4. | 138544 | Cage 7X677 |
5. | BS8-2334 PIECE1 | Cage 63857 |
6. | 791-514-9011 | Cage 99193 |
7. | 1229E421 | Cage D9182 |
8. | 1019068-042 | Cage 0HBH2 |
9. | 411100-42 | Cage 96214 |
10. | MS35333-42 | Cage 0158B |
11. | 0706047 | Cage S3002 |
12. | 55961 | Cage 96046 |
13. | 138544 | Cage 89346 |
14. | MS35333-42 | Cage 80205 |
15. | 6232 | Cage 64829 |
16. | 200422A | Cage 1ML14 |
17. | 801708 | Cage 49185 |
18. | M256 | Cage 61208 |
19. | PE80 | Cage 66289 |
20. | 0906960-0 | Cage 6N299 |
21. | 721336H | Cage 89346 |
22. | 802492 | Cage 19203 |
23. | 4198000-014 | Cage 82577 |
24. | 4198000-014 | Cage 05869 |
25. | 138544 | Cage 12204 |
26. | M2046S | Cage 61208 |
27. | PE56A | Cage 66289 |
28. | 456702 | Cage 24617 |
29. | 422H044H14 | Cage 88725 |
30. | 3-8 | Cage 05241 |
31. | 200422A | Cage 28265 |
32. | XX002-0667 | Cage H2229 |
33. | XX002-0671 | Cage H2229 |
34. | 70034-42 | Cage 95097 |
35. | 801708 | Cage 02280 |
36. | 0906960 | Cage 92392 |
37. | 906960 | Cage 92392 |
38. | 3B4506 | Cage 14544 |
39. | MS35333-42 | Cage 96906 |
40. | AN936A616 | Cage 88044 |
41. | MS35333-59 | Cage 96906 |
42. | 6F6 | Cage 12603 |
43. | 34907S2 | Cage 23040 |
44. | 10082543 | Cage A486G |
45. | 1019068-042 | Cage 05037 |
46. | 138544 | Cage 24617 |
47. | 210-013 | Cage 80009 |
48. | 5310005957237 | Cage SCY13 |
49. | 138544 | Cage 31007 |
Nothing similar to this part number was found in our inventory
A washer which is usually round with a centrally located hole. its edges and two bearing surfaces are so designed that applied pressure brings into play the spring tension and/or frictional locking principle which materially resists any tendency toward turning. it may be made of one or two pieces