Used on 2350-01-368-9528. 2a 2nd end thread class 18 all ends thread quantity per inch tube elbow, notched base part is MS51521B6s modified with three 1/10 inch notches 0.075 inch deep cut into external thread end approximately 120 degrees apart passivate elbow surface treated unf all ends thread series
Used on 5420-01-430-5403, carrier, bridge launching, p/n lscp940001, 19207. 2a all ends thread class 12 all ends thread quantity per inch un all ends thread series
Used on f/a-18 e/f. 3b 2nd end thread class 14 2nd end thread quantity per inch (navy) elbow, tube - axial swage to female beam seal, 90 degrees, reducer, 5000 psi unjs 2nd end thread series
elbow, tube - bulkhead, 90 degree, beam seal, 5000 psi 90 degree male elbow for use at bulkheads; tube size is 3/8 inch; t thread mil-s-8879 0.5625-20 unjs-3a; weight - 0.050 lbs; drawing section a is 1.353" plus/minus 0.015, section b is 0.704 plus/minus 0.015
Used on helicopter, attack, p/n ah-64d, nsn 01-355-8250. 3a 2nd end bulkhead thread class elbow, bulkhead universal, 45 degree, flareless tube fist end per MS33514, style g unjf 2nd end bulkhead thread series
Used on f/a-18 e/f. 3b 2nd end thread class 20 2nd end thread quantity per inch (navy) elbow, tube - axial swage to female beam seal, 90 degrees, reducer, 5000 psi unjs 2nd end thread series
Used on 2350-01-368-9500, carrier, ammunition, tracked, p/n 8750264. 2a all ends thread class 16 all ends thread quantity per inch elbow, tube, 90 degree, flareless type, hydraulic zinc surface treated unf all ends thread series
Used on 2350-01-368-9500, carrier, ammunition, tracked, p/n 8750264. 2a all ends thread class 12 all ends thread quantity per inch elbow, tube, 90 degree, flareless type, hydraulic zinc surface treated un all ends thread series
Used on V-22. 3a 1st end thread class 16 all ends thread quantity per inch fitting, elbow, swivel nut, 90 deg, dynamic beam seal, 5000 psi unj all ends thread series
