Used on contractor logistics lifetime support (crls) roller, vibratory, self-proprlled type ii caterpillar model cs-563d contract no. daae07-98-c-s007 nsn 3895-01-456-2735 tm - 5-3895-383.
Used on sub engineering and diesel system. brazier head style 0.6000" grip length hinge pin hardware, nssn class submarine, condensate pump control panel
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style chemical surface treatment per mil-c-5541, class 1a; heat treatment in accordance with mil-h-6088 for aluminum alloys anodize surface treated
Used on ch-53a/d/e. countersunk w/ reverse chamfer head style 26000 single pounds per square inch shear strength rivet, solid, 120 degree flush interference shear head anodize surface treated
Used on ch-53a/d/e. countersunk w/ reverse chamfer head style 26000 single pounds per square inch shear strength rivet, solid, 120 degree flush interference shear head anodize surface treated
Used on aircraft,b-2bomber. flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 26000 single pounds per square inch shear strength oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style rivet, solid, countersunk 100 degrees, precision head the conical surface of the head shall be concentric with the shank of the rivet within .005; head-cocking angle relative to axis of rivet 1/2 degree max; rivets may be furnished within plain ends, or chamfered ends witha a radius to the "t" dimentions or a 20 degree chamfer to the "s" dimention anodize surface treated
Used on f16c/d common; aircraft, f-16. flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style rivet, solid, countersunk 100 degrees, precision head, aluminum
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style rivet, solid, countersunk 100 degrees, precision head the conical surface of the head shall be concentric with the shank of the rivet within .005; head-cocking angle relative to axis of rivet 1/2 degree max; rivets may be furnished within plain ends, or chamfered ends witha a radius to the "t" dimentions or a 20 degree chamfer to the "s" dimention anodize surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style rivet, solid, countersunk 100 degrees, precision head the conical surface of the head shall be concentric with the shank of the rivet within .005; head-cocking angle relative to axis of rivet 1/2 degree max; rivets may be furnished within plain ends, or chamfered ends witha a radius to the "t" dimentions or a 20 degree chamfer to the "s" dimention anodize surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style rivet, solid, countersunk 100 degrees, precision head the conical surface of the head shall be concentric with the shank of the rivet within .005; head-cocking angle relative to axis of rivet 1/2 degree max; rivets may be furnished within plain ends, or chamfered ends witha a radius to the "t" dimentions or a 20 degree chamfer to the "s" dimention
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style rivet, solid, countersunk 100 degrees, precision head the conical surface of the head shall be concentric with the shank of the rivet within .005; head-cocking angle relative to axis of rivet 1/2 degree max; rivets may be furnished within plain ends, or chamfered ends witha a radius to the "t" dimentions or a 20 degree chamfer to the "s" dimention
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style rivet, solid, 100 degree flush head A286 corrosion resistant steel oshear strength at room temp as follows, 85, 000 psi to 95, 000 psi; 90, 000 psi after driving; heat at 1650 deg f for 25 minutes passivate surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 90000 single pounds per square inch shear strength passivate surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 49000 single pounds per square inch shear strength F15 acft; aircraft, eagle f-15