flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.047 " grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.297 " grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.359" grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.334 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
Used on w/s:teammate, an/trq-32; radar set, an/tpn-18; airborne mobile dir air spt ctl (2id),(02m jul83)(an/uyq-3a); aircraft, (ac-130h, mc-130h, ec-130e, hc-130); communications terminal, satellite an/gsc-39(v)1; traffic jam, an/tlq-17a; aircraft, thunderbolt ii, a-10; suppoort equipment, b-52 aircraft; support equipment, b-1 aircraft; missile, advanced medium range air-to-air (amraam)/aim120a. flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style anodize or chromate surface treated
Used on w/s:close in weapon system (ciws-phalanx); aircraft, (ac-130h, mc-130h, ec-130e, hc-130); def comm meteorl (an/tmq-028, an/tcc-76, an/tps-068, an-tcc-77); missile, advanced medium range air-to-air (amraam)/aim120a; support equipment, b-1 aircraft; support equipment, b-52 aircraft; engine, aircraft tf33-pw-102 (c-135e, ec-135h/k/p); teammate, an/trq-32; radar set, an/pps-5b. flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 26000 single pounds per square inch shear strength rivet has 0.020 inch depth dimple in head, with a diameter of 0.030" anodize or chromate surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.146" grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.006 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.068 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 26000 single pounds per square inch shear strength anodize or chromate surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.194 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.256 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.756 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.208 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.531 " grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 1.531 centimeters grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.468 " grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.281 " grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.396 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.421 " grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 1.562 " grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.381 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.631 mils grip length 26000 single pounds per square inch shear strength anodize or chromate surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.881 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 1.131 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 1.256 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 1.506 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 1.756 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.318 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.365 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.615 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.990 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 1.115 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 1.365 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 1.615 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 2.115 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 2.615 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.053 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.177 mils grip length 26000 single pounds per square inch shear strength anodize or oxide film surface treated
