3a thread class right-hand 1.500" thread length flat chamfer head style 0.061" hole diameter 11 thread quantity per inch passivate surface treated unc thread series
Used on f18 e&f. 3a thread class right-hand 0.375" thread length spline drive shear head head style 0.313" grip length 24 thread quantity per inch bolt-close tolerance, spline drive, cres (125 ksi fsu) driled, short thread passivate surface treated unjf thread series
Used on F-15I. 3a thread class right-hand 0.468" thread length double hexagon w/hole head style 1.500" grip length 28 thread quantity per inch bolt, close toler passivate surface treated unjf thread series
flat washer head style 0.187" grip length multi grip blind breakstem rivet one rivet can be used in multiple material thicknesses; stem is locked in shell, eliminating the risk of mandrel head vibrating loose; weather resistant joint; bubling formation of the avex will fill slightly oversized or irregular holes, providing increased strength zinc mandrel surface treated
Used on 2350-01-368-9528. 2a thread class right-hand 2.680" thread length hexagon extended washer head style 13 thread quantity per inch zinc surface treated unc thread series
3a thread class right-hand 0.323" thread length pan head style 3.875" grip length 32 thread quantity per inch cadmium surface treated unjf thread series
Used on fathometer, an, bqn-17. oval/truss head style rivet, solid, universal head, alluminum alloy end item c-17 aircraft; rivets may be furnished with plain ends, or ends chamfered up to 20 degrees to the "s" dimention, or may have a radius to the "t" dimention; chemical surface treatment per mil-c-5541, class 1a gold/yellow; outer diameter of indented ring shall be a of 75 percent of rivet shank diameter; the depth of the ring shall be .010 inch; indented ring is required on 7050 rivets manufactured after 2 july 1990
