flush countersunk head style 0.251" grip length 5380 double pounds per square inch shear strength pin-rivet grooved, titanium composite aplications, 130 degree flush head, stump type psurface tecture ra per ansi/asme B46.1; bearing surface, head to shank radius,
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style rivet, solid, countersunk 100 degrees, precision head the conical surface of the head shall be concentric with the shank of the rivet within .005; head-cocking angle relative to axis of rivet 1/2 degree max; rivets may be furnished within plain ends, or chamfered ends witha a radius to the "t" dimentions or a 20 degree chamfer to the "s" dimention anodize surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style rivet, solid, countersunk 100 degrees, precision head the conical surface of the head shall be concentric with the shank of the rivet within .005; head-cocking angle relative to axis of rivet 1/2 degree max; rivets may be furnished within plain ends, or chamfered ends witha a radius to the "t" dimentions or a 20 degree chamfer to the "s" dimention anodize surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style rivet, solid, 100 degree flush head A286 corrosion resistant steel oshear strength at room temp as follows, 85, 000 psi to 95, 000 psi; 90, 000 psi after driving; heat at 1650 deg f for 25 minutes passivate surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style rivet, solid, countersunk 100 degrees, precision head the conical surface of the head shall be concentric with the shank of the rivet within .005; head-cocking angle relative to axis of rivet 1/2 degree max; rivets may be furnished within plain ends, or chamfered ends witha a radius to the "t" dimentions or a 20 degree chamfer to the "s" dimention anodize surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style rivet, solid, countersunk 100 degrees, precision head the conical surface of the head shall be concentric with the shank of the rivet within .005; head-cocking angle relative to axis of rivet 1/2 degree max; rivets may be furnished within plain ends, or chamfered ends witha a radius to the "t" dimentions or a 20 degree chamfer to the "s" dimention
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style rivet, solid, countersunk 100 degrees, precision head the conical surface of the head shall be concentric with the shank of the rivet within .005; head-cocking angle relative to axis of rivet 1/2 degree max; rivets may be furnished within plain ends, or chamfered ends witha a radius to the "t" dimentions or a 20 degree chamfer to the "s" dimention
Used on b-1b cmup blk. 3a thread class right-hand 0.345" thread length hexagon head style 0.046" hole diameter 1.678" grip length 32 thread quantity per inch cadmium surface treated unjf thread series
Used on 4920-01-272-5962. 3a thread class right-hand 0.750" thread length flat fillister head style 24 thread quantity per inch oxide surface treated unc thread series
brazier head style 0.188" grip length rivet-blind, protruding head, mechanically locked spindle, bulbed style a, class 1, code b lube in accordance with nas 1686; lock ring material applicable to visible lock type only; cad plating for (e) coded rivets with cres spindle provides lubricity only chromate sleeve surface treated
