Used on f/a-18 e/f aircraft. 3a thread class right-hand straight pan head style 0.500" grip length 28 thread quantity per inch (navy) pin-rivet, threaded, shear, protruding head, hex point drive, for sealant application passivate surface treated unjf thread series
Used on f/a-18 e/f aircraft. 3a thread class right-hand straight pan head style 0.688" grip length 28 thread quantity per inch (navy) pin - rivet, threaded, shear, protruding head, hex point drive, for sealant application passivate surface treated unjf thread series
3a thread class flush countersunk head style 28 thread quantity per inch pin-rivet, thread, tension, 100 deg c'sunk head hex point drive, for sealant application distance from head to injection port in 0.01 increments equals 36; item is a flat head passivate surface treated unjf thread series
3a thread class flush countersunk head style 28 thread quantity per inch pin-rivet, thread, tension, 100 deg c'sunk head hex point drive, for sealant application distance from head to injection port in 0.01 increments equals 51; item is a flat head passivate surface treated unjf thread series
Used on f18 e/f. 3a thread class right-hand 0.870" grip length 32 thread quantity per inch pin, rivet, threaded-tension, 100 degree c sunk head, hex point drive passivate surface treated unjf thread series
Used on f-18 de/f. 3a thread class right-hand flush countersunk head style 0.435" grip length 24 thread quantity per inch pin-rivet, threaded, shear, 100 degree c'sunk head, heax point drive lubricant:hi-kote 2 solid flim lubricant or dry film lubricant per as 5272 (kalgrad fa, incotec tec-lube or EM620c only) plus cetyl alcohol lubricant per mil-l-87132 (do not spin) unjf thread series
Used on f-18 de/f. 3a thread class right-hand flush countersunk head style 0.500" grip length 32 thread quantity per inch pin-rivet, threaded, shear, 100 degree c'sunk head, heax point drive lubricant:hi-kote 2 solid flim lubricant or dry film lubricant per as 5272 (kalgrad fa, incotec tec-lube or EM620c only) plus cetyl alcohol lubricant per mil-l-87132 (do not spin) unjc thread series
Used on fighter aircraft (f18-e/f). 3a thread class right-hand flush countersunk head style 0.673" grip length 24 thread quantity per inch navy) pin-rivet, threaded threaded end is chamfered at 45 degrees unjf thread series
Used on structural components; f18 aircraft. 3a thread class right-hand 0.531" thread length flat countersunk undercut head style 1.1775" grip length 24 thread quantity per inch screw, close tolerance-assembly, 100 deg countersunk head, dovetail slot, cres o-ring per ST7M251, no finish, no lubricant; 40 percent of non-bearing head surface coat with white paint, color 37875 per fed-std-595, removable with solvent passivate fastener surface treated unjf thread series
3a thread class right-hand flush countersunk head style 1.125" grip length 24 thread quantity per inch pin-rivet, thread, tension, 100 degree countersunk head hex point drive, for sealant application. distance from the head to the injection port is 0.52". indented slots on the head are in line with the injection port. passivate surface treated unjf thread series
3a thread class flush countersunk head style 24 thread quantity per inch pin-rivet, thread, tension, 100 deg c'sunk head hex point drive, for sealant application distance from head to injection prot in 0.01 increments equals 50; item is a flat head passivate surface treated unjf thread series
3a thread class right-hand flush countersunk head style 1.125" grip length 24 thread quantity per inch pin-rivet, thread, tension, 100 degree countersunk head hex point drive, for sealant application. distance from the head to the injection port is 0.38". indented slots on the head are in line with the injection port. passivate surface treated unjf thread series
3a thread class right-hand flush countersunk head style 0.812" grip length 24 thread quantity per inch pin-rivet, thread, tension, 100 degree countersunk head hex point drive, for sealant application. distance from the head to the injection port is 0.50". indented slots on the head are in line with the injection port. passivate surface treated unjf thread series
3a thread class right-hand flush countersunk head style 0.875" grip length 24 thread quantity per inch pin-rivet, thread, tension, 100 degree countersunk head hex point drive, for sealant application. distance from the head to the injection port is 0.38". indented slots on the head are in line with the injection port. passivate surface treated unjf thread series
3a thread class right-hand flush countersunk head style 0.875" grip length 24 thread quantity per inch pin-rivet, thread, tension, 100 degree countersunk head hex point drive, for sealant application. distance from the head to the injection port is 0.50". indented slots on the head are in line with the injection port passivate surface treated unjf thread series
3a thread class right-hand flush countersunk head style 0.750" grip length 24 thread quantity per inch pin-rivet, thread, tension, 100 degree countersunk head hex point drive, for sealant application distance from the head to the injection port is 0.40". indented slots on the head are in line with the injection port. passivate surface treated unjf thread series
Used on fighter aircraft-first (f18 e/f). right-hand 0.767" thread length spline extended washer head style 1.000" grip length 20 thread quantity per inch unjf thread series
3a thread class right-hand flush countersunk head style 0.750" grip length 24 thread quantity per inch pin-rivet, thread, tension, 100 degree countersunk head hex point drive, for sealant application distance from head to injection port in 0.01 increments equals 38; item is flat head passivate surface treated unjf thread series
Used on fighter aircraft-first (f18 e/f). 3a thread class flush countersunk head style 0.563" grip length 24 thread quantity per inch distance between the head passivate surface treated unjf thread series
Used on fighter aircraft-first (f18 e/f). 3a thread class flush countersunk head style 1.063" grip length 24 thread quantity per inch distance between the head passivate surface treated unjf thread series
3a thread class flush countersunk head style 24 thread quantity per inch pin-rivet, thread, tension, 100 deg c 'sunk head hex point drive, for sealant application distance from head to injection port in 0.01 increments equals 38; item is a flat head passivate surface treated unjf thread series
Used on fighter aircraft-first (f18 e/f). 3a thread class flush countersunk head style 0.937" grip length 24 thread quantity per inch distance from the head to the injection port is .58 in. indented slots in line with injection hole. passivate surface treated unjf thread series
3a thread class flush countersunk head style 24 thread quantity per inch pin-rivet, thread, tension, 100 deg c'sunk head hex point drive, for sealant application distance from head to injection port in 0.01 increments equals 50. item is a flat head passivate surface treated unjf thread series
Used on fighter aircraft-first (f18 e/f). 3a thread class right-hand 0.345" thread length dished hexagon head style 0.802" grip length 32 thread quantity per inch passivate surface treated unjf thread series
Used on fighter aircraft-first (f18 e/f). 3a thread class flush countersunk head style 0.937" grip length 24 thread quantity per inch distance from the head to the injection port is .52". indented slots on head in line with the injection hole. passivate surface treated unjf thread series
Used on fighter aircraft-first (f18 e/f). 3a thread class flush countersunk head style 0.937" grip length 24 thread quantity per inch distance from the head to the injection port is .40".indented slots on the head are in line with the injection port. passivate surface treated unjf thread series
3a thread class flush countersunk head style 24 thread quantity per inch pin-rivet, thread, tension, 100 deg c'sunk head hex point drive, for sealant application distance from head to injection port in 0.01 increments equals 50. item is a flat head passivate surface treated unjf thread series
Used on fighter aircraft-first (f18 e/f). 3a thread class flush countersunk head style 0.937" grip length 24 thread quantity per inch distance between the head passivate surface treated unjf thread series
Used on fighter aircraft-first (f18 e/f). 3a thread class flush countersunk head style 0.875" grip length 24 thread quantity per inch distance between the head passivate surface treated unjf thread series
Used on f18 e/f. 3a thread class right-hand 0.453" thread length spline drive shear head head style 1.750" grip length 20 thread quantity per inch bolt-close tolerance, spline drive, cres (125 ksi ksu) drilled, short thread passivate surface treated unjf thread series
Used on fighter aircraft-first (f18 e/f). 3a thread class flush countersunk head style 0.875" grip length 24 thread quantity per inch distance between the head passivate surface treated unjf thread series
Used on f18 e/f. 3a thread class right-hand 0.453" thread length spline drive shear head head style 1.625" grip length 20 thread quantity per inch bolt-close tolerance, spline drive, cres (125 ksi fsu) drilled, short thread passivate surface treated unjf thread series
Used on f18 e/f. 3a thread class right-hand 0.453" thread length spline drive shear head head style 1.063" grip length 20 thread quantity per inch bolt-close tolerance, spline drive, cres (125 ksi fsu) drilled, short thread passivate surface treated unjf thread series
Used on fighter aircraft-first (f18 e/f). 3a thread class flush countersunk head style 0.813" grip length 24 thread quantity per inch distance between the head passivate surface treated unjf thread series
Used on fighter aircraft-first (f18 e/f). 3a thread class flush countersunk head style 0.813" grip length 24 thread quantity per inch distance between the head passivate surface treated unjf thread series
Used on f18 e/f. 3a thread class right-hand 0.453" thread length spline drive shear head head style 1.313" grip length 20 thread quantity per inch sbolt-close tolerance, spline drive, cres (125 ksi fsu) drilled, short thread passivate surface treated unjf thread series
Used on fighter aircraft-first (f18 e/f). 3a thread class flush countersunk head style 0.750" grip length 24 thread quantity per inch distance between the head passivate surface treated unjf thread series
Used on f18 e/f. 3a thread class right-hand 0.276" thread length spline drive shear head head style 0.563" grip length 32 thread quantity per inch bolt-close tolerance, spline drive, cres (125 ksi fsu) drilled, short thread passivate surface treated unjf thread series
Used on fighter aircraft-first (f18 e/f). 3a thread class flush countersunk head style 0.688" grip length 24 thread quantity per inch distance between the head passivate surface treated unjf thread series
Used on fighter aircraft-first (f18 e/f). 3a thread class flush countersunk head style 0.688" grip length 24 thread quantity per inch distance between the head passivate surface treated unjf thread series
Used on fighter aircraft-first (f18 e/f). 3a thread class flush countersunk head style 0.625" grip length 24 thread quantity per inch distance between the head passivate surface treated unjf thread series
