flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.063" grip length 70 single pounds per square inch shear strength any acceptable surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.501" grip length 710 single pounds per square inch shear strength cadmium sleeve surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.188" grip length 70 single pounds per square inch shear strength any acceptable surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.063" grip length 125 single pounds per square inch shear strength any acceptable surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.251" grip length 125 single pounds per square inch shear strength any acceptable surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.063" grip length 70 single pounds per square inch shear strength anodize sleeve or chromate sleeve surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.126" grip length 70 single pounds per square inch shear strength anodize sleeve or chromate sleeve surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.047" grip length 125 single pounds per square inch shear strength anodize sleeve or chromate sleeve surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.063" grip length 125 single pounds per square inch shear strength anodize sleeve or chromate sleeve surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.126" grip length 125 single pounds per square inch shear strength anodize sleeve or chromate sleeve surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.188" grip length 125 single pounds per square inch shear strength anodize sleeve or chromate sleeve surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.251" grip length 125 single pounds per square inch shear strength anodize sleeve or chromate sleeve surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.313" grip length 125 single pounds per square inch shear strength anodize sleeve surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.376" grip length 125 single pounds per square inch shear strength anodize sleeve or chromate sleeve surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.062" grip length 190 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.126" grip length 190 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.251" grip length 190 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.376" grip length anodize sleeve or chromate sleeve surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.078" grip length 275 single pounds per square inch shear strength anodize sleeve or chromate sleeve surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.126" grip length 275 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.251" grip length 275 single pounds per square inch shear strength anodize or oxide film surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.063" grip length 125 single pounds per square inch shear strength anodize sleeve or chromate sleeve surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.126" grip length 125 single pounds per square inch shear strength anodize sleeve or chromate sleeve surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.188" grip length 125 single pounds per square inch shear strength anodize or chromate surface treated
Used on 9w/s:aircraft, t-38; aircraft, eagle f-15; deep submergence systems programs (dssp); aircraft, phantom f-4; aircraft, (ac-130h, mc-130h, ec-130e, hc-130); f-22 raptor air dominance fighter; aircraft, galaxy c-5; aircraft, f-111; aircraft, tomcat f-14. flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.126" grip length 70 single pounds per square inch shear strength
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.126" grip length 70 single pounds per square inch shear strength cadmium surface treated
flush (flat) countersunk (included angle - less than 135 deg w or w/o chamfer) head style 0.313" grip length 710 single pounds per square inch shear strength cadmium sleeve surface treated
