0.796" overall length 0.124" overall width cross drilled connectors for hold down screws are 0.064 in. diameter through two places in each connector; use with number 0-80 screws
Used on awo awacs-e3a. this is a high voltage resistor with a +/- 1% tolerance. resistance shall be tested using 100vdc as specified in drawing 584R549 rev m section 4.8.3 (mil-prf-55182, table xvii) . a keithley 2400 multimeter or better mulitmeter shall be used. it was found that the HP3456a multimeter is not adequate to test these resistors.
Used on 5805-01-452-5730, central office telephone, automatic. 1.250" overall length 0.275" overall width zinc surface treated hood, top opening w/jackscrew
2.750" overall length 0.900" overall width 9SP2t (type n) ; failsafe; indicatorckt; selected position of switch is controlled by ttl logic; switch requires only plus 28vdc for coils; voltage level, low -0 to 0.8 vdc; high, -2-4 to 5.5 vdc; input current, low -0ma, high, -1.35ma max @3.85vdc
Used on 5450-01-359-3350. 2b thread class right-hand 3.567" overall length 2.605" overall width 32 thread quantity per inch furnished items - protective cover double stub thread series
