Used on floodlight. 2a single mounting facility thread class 2.125" overall length 2.075" overall width relay type spno unf single mounting facility thread series
2a single mounting facility thread class 1.000" overall length 1.000" overall width mounting in 3 corners on 0.687 in spacing unc single mounting facility thread series
Used on controller. 5.060" overall length 2.860" overall width this size e device will not drive a size 5 or 5s coil at 110 volts; use only with 440 volt contactor coils
Used on mep810a/b. 2.688" overall length 2.312" overall width ename on mfg data is phase sequence relay; relay remains deenergized when applied three phase voltage is in proper sequence
0.783" overall length 0.421" overall width voltage 12.0 volts; pick up voltage 9.6 volts ; drop-out voltage 1.2 volts ; operating current 25.0 milliamps; coil resistance 432.0 ohms to 528.0 ohms ; operating speed 30 cycles per minute; operating temperature range minus 40.0 to plus 65.0 degrees c; contact resistance 30.0 milliohms ; switching power 150.0 watts
coil voltage 28 volts; maxpick up voltage at 25 degrees celsius ; max pick up voltage at 125 degrees celsius 19.5; min. drop out voltage at minus 70 degrees celsius 1.5; max. hold voltage at 125 degrees celsius 7.0; coilresistance 290 volts; minus 70 to plus 125 degrees celsius temperature range; hermetic seal