14.00mm overall width 35.00mm bore diameter outer faces of inner ring perpendtcular to bore 252e single row, one-direction locating, two lip inner ring, one lip outer ring, separable
outer ring raceway 6 uin aa, outer ring lips 16 uin aa, od surface of outer ring 10 uin aa, all surfaces of rollers 2 uin aa, heat stabilized for operation at M65 to P350 deg f, bearing specific dynamic load cap. 7270 lb, outer ring containers 6 slots on each face equally spaced so that the slots on 1 face are displaced by 30 deg from slots on the opposite face, 0.050 in. min, 0.055 in. max w, 0.050 in. min, 0.055 in. max deep, id retainer
0.6868" overall width 55.0mm bore diameter outer ring extends one side, inner ring width to be 13 mm 252e single row, one-direction locating, two lip inner ring, one lip outer ring, separable
2.5475" overall width 3.7740" bore diameter inner ring width 2.6875 in., hole 0.7716 in. dia loated 1.2730 in. from end of outer ring bty 0.1200 in. deep, separabe outer ring, two lip inner ring
22.0mm overall width 80.0mm bore diameter 254a single row, one-direction locating, two lip inner ring, one lip outer ring with one roller retainment ring on outer, non-separable
1.6195" bore diameter stabilized for operation at M65 deg to D350 deg f lubrication groove 3/64 in. depth by 3/8 in. w located id center of inner ring 6 lubrication holes 3/16 in. dia equally spaced in lubrication groove 6 grooves 0.030 in. max depth by 1/8 in. w equally spaced on both faces 262a single row, two lip inner ring, no outer ring, roller retainment rings, non-separable
