0.4995" bore diameter outer race member thread size 1.1875-28un-3a; 4 holes 0.060 in. min, max 0.066 in. lubricant dry film outer race member surface treated without insert or liner
0.7495" bore diameter bearing is primarily intended foruse in hydraulic actuator of F111 chromate inner member surface treated with insert and/or liner with staking groove
6.2740" bore diameter outer ring has three holding tabseach with a 0.2810 in. min., 0.2860 in. max. hole thru; item used on F1, with end item F16a/b/c/d without insert or liner
fbore has internal groove one end 1.005 in. dia min, 1.015 in. dia max; bore counterbored one end 1.23 in dia min, 1.29 in. dia max; bore tapered to 2.22 in. dia min, 2.28 in. dia max per foot of length
1.7492" bore diameter oversize o.d. version of KWB28-20sga; used on link, pin gudgeon of mainlanding gear of the C5 a/b cadmium outer race member surface treated without insert or liner with staking groove
1.7492" bore diameter oversize o.d. version of KWB28-20sga; used on link pin gudgeon of the main landing gear of the C5 a/b cadmium outer race member surface treated without insert or liner with staking groove
1.7492" bore diameter oversize o.d. version of KWB28-20sga; used on link, pin gudgeon of mainlanding gear of C5 a/b cadmium outer race member surface treated without insert or liner with staking groove
1.7492" bore diameter oversize o.d. version of KWB28-20sga; used on link, pin gudgeon of mainlanding gear of C5 a/b cadmium outer race member surface treated without insert or liner with staking groove
0.3125" bore diameter ball must rotate freely under finger pressure at 72 degrees f. max.; ball shall be fully interchangeable, no selective assembly allowed; ball misalignment capability 10 degrees min. lubricant dry film inner member surface treated without insert or liner
