Bearings. 526,362 NSN and commercial part numbers

Home » Catalog » Bearings (Page 2871)
Part Number
NSN
INC
Category
NSN 3120-00-157-8609
77777
Journal Bearings
NSN 3120-00-157-8473
77777
Wheel Bearings
NSN 3120-00-157-8455
77777
Bushings
NSN 3120-00-157-8434
13205
See more Sleeve Bearings
Used on torpedo.
NSN 3120-00-157-8420
77777
Wheel Bearings
NSN 3120-00-157-8264
77777
Filter Shaft Housings
Used on gun sight mk29.
NSN 3120-00-157-7204
13206
See more Sleeve Bushings
0.3000" overall length 22c solid, external flange one end
NSN 3110-00-157-6107
00014
1.4995" bore diameter banded od, one face of outer ring forms lip which extends down to meet shoulder on od of inner ring clutch release
NSN 3110-00-157-6105
00014
1.8750" overall length 1.3750" bore diameter banded od clutch release, integral inner ring w/fork groove, slider type
NSN 3110-00-157-6097
30213
0.6250" overall width 4.0000" bore diameter seal retained by plastic snap ring, cadmium exposed surfaces, pair of bearings mounted on side opposite seal 90a universal ground faces, counterbored outer ring, non-separable
NSN 3110-00-157-6091
00014
NSN 3110-00-157-6090
00014
0.5000" overall width 0.6250" bore diameter inner ring cadmium plated non-loading groove, non-separable
NSN 3110-00-157-6086
00014
0.5000" overall width 15.0mm bore diameter removable seals, 0.0250 in. radii all outside corners, inner ring recessed one side 0.0110 in. min 0.0160 in. max deep non-loading groove, non-separable
NSN 3110-00-157-6083
00014
0.5000" overall width 12.00mm bore diameter seals removed non-loading groove, non-separable
NSN 3110-00-157-6081
00014
1.4911" overall width 1.7712" bore diameter non-loading groove, non-separable
NSN 3110-00-157-6080
00014
36.0mm overall width 45.00mm bore diameter non-loading groove, non-separable
NSN 3110-00-157-6070
00014
outer ring has wide face on one side that butts directly against clutch throwout arm
NSN 3110-00-157-6069
00014
0.2500" bore diameter od tapered, side opposite shield is modified for additional shield
NSN 3110-00-157-6060
00014
0.3750" bore diameter inner or outer ring composed of two or more parts split outer ring with flanged band, solid inner ring extended on flange side, non-separable
NSN 3110-00-157-6052
00014
0.2656" bore diameter inner or outer ring composed of two or more parts, furnished with screw
NSN 3110-00-157-6045
00014
1.3380" overall width 0.7150" bore diameter inner ring counterbored to a width of 0.5469 in., balance of inner ring 0.7500 in., broached for 0.6875 in. hex shaft, spun 0uter casing extends 0.3437 in. on one side non-loading groove, non-separable
NSN 3110-00-157-6029
00014
55.00mm bore diameter non-loading groove, non-separable
NSN 3120-00-157-5121
13206
See more Sleeve Bushings
0.1160" overall length passivate surface treated 17c solid, plain, no outside flanges
NSN 3120-00-157-5086
13206
See more Sleeve Bushings
0.2450" overall length anodize surface treated 17c solid, plain, no outside flanges
NSN 3120-00-157-5085
13206
See more Sleeve Bushings
0.2820" overall length passivate surface treated 17c solid, plain, no outside flanges
NSN 3120-00-157-5013
77777
Bearing Supports
Used on oh-58a and/or c, rotary wing aircraft.
NSN 3120-00-157-5012
77777
Bearing Supports
Used on oh-58a and/or c, rotary wing aircraft.
NSN 3120-00-157-4995
13206
See more Sleeve Bushings
0.1950" overall length passivate surface treated 17c solid, plain, no outside flanges
NSN 3120-00-157-4864
13206
See more Sleeve Bushings
0.7380" overall length 17c solid, plain, no outside flanges
NSN 3130-00-157-4609
21546
NSN 3120-00-157-4289
28215
0.7500" outside diameter plain, protruding hubs
NSN 3120-00-157-4084
13206
See more Sleeve Bushings
0.6250" overall length
NSN 3110-00-157-3747
00019
banded od
NSN 3110-00-157-3740
00019
grooved race surface, banded od
NSN 3110-00-157-3731
00019
od banded, bore dia equivalent to washer dia of 0.5230 in. min, 0.5270 in. max
NSN 3110-00-157-3727
00019
overlaping washers clutch release, thrust, lubricated
NSN 3110-00-157-3726
00019
bronze ferrule on id of one washer, washers overlap clutch release, thrust, lubricated
NSN 3110-00-157-3302
00029
1.2400" overall width 30.7500" bore diameter outer ring, roller, cylindrical
NSN 3110-00-157-3301
00028
1.2400" overall width 22.5050" bore diameter inner ring, roller, cylindrical
NSN 3120-00-157-2256
13205
See more Sleeve Bearings
1.9900" overall length 22c solid, external flange one end
NSN 3110-00-157-2100
30213
62.0mm overall width 60.00mm bore diameter 92b counterbored outer rings, non-separable, back to back mounting
NSN 3110-00-157-2094
30213
30.0mm overall width 20.00mm bore diameter 92b counterbored outer rings, non-separable, back to back mounting
NSN 3110-00-157-2091
00014
16.0mm overall width 30.00mm bore diameter counterbored outer ring, non-separable
NSN 3110-00-157-2083
00019
0.1000 in. radius by 0.0400 in. deep on outside of one ring bore, 0.8750 in. bore on other ring grooved race surface, banded od
NSN 3110-00-157-2082
30213
66.0mm overall width 130.00mm bore diameter 92b counterbored outer rings, non-separable, back to back mounting
NSN 3110-00-157-2071
30213
50.0mm overall width 45.00mm bore diameter 92c counterbored outer rings, non-separable, face to face mounting
NSN 3110-00-157-2070
30213
30.0mm overall width 20.00mm bore diameter 92c counterbored outer rings, non-separable, face to face mounting
NSN 3110-00-157-2050
00014
8.0mm overall width 15.00mm bore diameter inner counterbored outer ring, magneto type, s eparable
NSN 3110-00-157-2046
00014
5.0mm overall width 5.00mm bore diameter torque tested, raceways have extra smooth finish counterbored outer ring, magneto type, s eparable
NSN 3110-00-157-2037
00014
20.00mm overall width 50.00mm bore diameter bore counterbored outer ring, non-separable