0.2812" overall width 0.2500" bore diameter spressed stainless steel retainer heat treat parts per mil-h-6875; immediately after quenching, refrigerate parts at minus 120 to minus 90 deg f for 2 hours; followed by tempering at a temp of plus 325 deg f for 3 hours; repeat refrigeration non-loading groove, non-separable
0.6770" overall width 0.5289" bore diameter kclosed end, 0.3125 in. w.v shaped groove at closed end, undercut to 0.8760 in. dia for retainment plate on side opposite closed end, two arms w/two 0.3125 in. 24 tapped holes, spaced 0.6562 in. from bore centerline
8.00mm bore diameter corners chamfered 0.0620 in. by 35 deg also notch in face of outer ring alsoselected, classified non-loading groove, non-separable
