Bearings. 526,362 NSN and commercial part numbers

Home » Catalog » Bearings (Page 2148)
Part Number
NSN
INC
Category
NSN 3110-00-806-8803
00015
NSN 3110-00-806-8800
00015
NSN 3110-00-806-8736
00014
NSN 3110-00-806-8734
00015
NSN 3110-00-806-8720
00014
NSN 3110-00-806-8685
00015
NSN 3120-00-806-8592
13205
See more Sleeve Bearings
0.2810" overall length 17c solid, plain, no outside flanges
C0MP0SITI0NA1A2A30RA4 Sleeve Bearing
C0MP0SITI0NA1A2A30RA4
NSN 3120-00-806-8356
13205
See more Sleeve Bearings
1.4800" overall length 17c solid, plain, no outside flanges
NSN 3110-00-806-8203
00014
0.1562" overall width 0.1250" bore diameter torque tested 0.4750 gm-cm max under 400 gmsthrust load non-loading groove, non-separable
NSN 3110-00-806-8198
00014
0.2282" overall width 12.00mm bore diameter silver plated retainer non-loading groove, non-separable
NSN 3110-00-806-8196
00014
0.3463" overall width 30.00mm bore diameter non-loading groove, non-separable
NSN 3110-00-806-8193
00014
0.1250" overall width 0.1875" bore diameter non-loading groove, non-separable
NSN 3110-00-806-8190
00041
0.6248" bore diameter integral shields, two cres holding rings on od of outer ring, retainerless, radial play 0.0005 in. min @to 0.0015 in. max
NSN 3110-00-806-8189
00014
0.1250" bore diameter non-loading groove, non-separable
NSN 3110-00-806-8097
00014
NSN 3110-00-806-8036
00014
NSN 3120-00-806-7444
13206
See more Sleeve Bushings
0.2938" overall length cadmium surface treated 22c solid, external flange one end
NSN 3110-00-806-7443
00040
3a thread class right-hand 0.3440" thread length 1.3599" overall length 32 thread quantity per inch cotter pin hole in stud end chromium exposed surfaces as mounted surface treated cam follower unf thread series
NSN 3120-00-806-7036
13205
See more Sleeve Bearings
1.5000" overall length 22c solid, external flange one end
NSN 3120-00-806-5685
13208
0.5620" bore diameter with insert and/or liner
NSN 3110-00-806-5426
77777
Su Bearing Assemblys
NSN 3110-00-806-5311
30213
0.9700" overall width 2.3616" bore diameter pair of bearings, back to back mounting 92a non-loading groove, non-separable, tandem mounting
NSN 3120-00-806-4971
13206
See more Sleeve Bushings
0.4637" overall length cadmium surface treated 17c solid, plain, no outside flanges
NSN 3110-00-806-4957
00019
flat race surface, in line ball retainer
NSN 3110-00-806-4948
00014
0.1250" bore diameter non-loading groove, non-separable
NSN 3110-00-806-4946
00014
0.1960" overall width 0.2500" bore diameter non-loading groove, non-separable
NSN 3110-00-806-4944
00014
0.4375" overall width 0.7500" bore diameter 50 pct full of lubricant non-loading groove, non-separable
NSN 3120-00-806-4872
13205
See more Sleeve Bearings
0.7500" overall length 22c solid, external flange one end
NSN 3120-00-806-4316
13211
1.2400" outside diameter passivate surface treated round
NSN 3110-00-806-4266
00051
NSN 3120-00-806-4016
13206
See more Sleeve Bushings
0.7140" overall length 17a split, plain, no outside flanges
NSN 3120-00-806-3502
13211
NSN 3110-00-806-3113
77777
Roller Bearings
NSN 3110-00-806-3063
00014
0.8750" overall width 20.00mm bore diameter w/o grease plug non-loading groove, non-separable cartridge type
NSN 3120-00-806-2701
13205
See more Sleeve Bearings
17c solid, plain, no outside flanges
NSN 3110-00-806-2663
00014
0.1250" bore diameter non-loading groove, non-separable
NSN 3110-00-806-2645
00014
0.0937" overall width 0.0781" bore diameter non-loading groove, non-separable
NSN 3110-00-806-2643
00014
0.1094" overall width 0.0937" bore diameter non-loading groove, non-separable
NSN 3110-00-806-2630
00014
0.1396" overall width 0.1248" bore diameter internal clearance measured under 1/2 lb gage load also inner ring radial runout 0.0001 in. non-loading groove, non-separable
NSN 3120-00-806-2611
13208
0.2495" bore diameter chromium inner member surface treated without insert or liner
NSN 3110-00-806-2439
22293
sides of plate form modified equilateral triangle; max surface finish id anodize surface treated
NSN 3110-00-806-2428
00050
3b thread class right-hand 2.3300" overall length 0.2495" bore diameter 20 thread quantity per inch single row, concave rollers unjf thread series
NSN 3120-00-806-2187
13206
See more Sleeve Bushings
Used on ch-47c,helicopter,cargo-transport.
NSN 3120-00-806-1029
13206
See more Sleeve Bushings
1.0908" overall length cadmium surface treated 17c solid, plain, no outside flanges
NSN 3110-00-806-0649
00019
grooved race surface
NSN 3120-00-806-0370
13205
See more Sleeve Bearings
NSN 3120-00-806-0369
13205
See more Sleeve Bearings
NSN 3130-00-806-0079
21546
NSN 3110-00-806-0035
00051
1.0000" overall width 2.7500" bore diameter separable rollers, open end, drawn shell
NSN 3120-00-805-8492
13206
See more Sleeve Bushings
1.8880" overall length 17c solid, plain, no outside flanges