Used on operator housing assy. lockout ballscrew assembly.. bearing items referencing "dss-fc" in the remarks column of the parts list, material list, or joint list (as applicable) are those items within the dss-soc boundry which are full compliance (fc) as defined in the nssn dss certification program plan. these items shall meet the requirements specified on the drawing/diagram
Used on operator housing assy, lockout balscrew assembly. bushing/bearing items referencing "dss-fc" in the remarks column of the parts list, material list, or joint list (as applicable) are those items within the dss-soc boundry which are full compliance (fc) as defined in the nssn dss certification program plan. these items shall meet the requirements specified on the drawing/diagram
Used on operator housing assy, lockout ballscrew assembly.. 2.5000" overall width 3.5060" bore diameter bearing journal items referencing "dss-fc" in the remarks column of the parts list. material list or joint list (as applicable) are those items within the dss-soc boundry which are full compliance (fc) as defined in the nssn dss certification program plan. these items shall meet the requirements specified on the drawing/diagram inner ring, roller, cylindrical
Used on operator housing assy. lockout ballscrew assembly.. retainer, bearing (1) at assembly thread bearing retainer pn 12 onto the ball screw nut pn 2 as close to flush as possible with end of ballnut thread. see section 11-58. lubricate threads on the ballscrew nut pn 2 with aeroshell no 22 per dod-g-24508 (eb pn 52-06-37258) . (2) position pn 12, locating (8) 0.406 diameter holes 22.5 degrees from 0.687 diameter hole in pn 31
0.3900" overall length bushing electro-mechanical linear actuator 17c-2 solid, plain, no outside flanges, interior flange (s) not located at either end
