0.5450" overall width 1.1809" bore diameter aligning ring on one face of outer ring of one bearing 90a universal ground faces, counterbored outer ring, non-separable
34.0mm overall width 35.0mm bore diameter stabilized for operation from M65 deg f to P300 deg f 92c counterbored outer rings, non-separable, face to face mounting
0.9448" overall width 1.5748" bore diameter permanently mark same serial no. on all bearing elements 92b counterbored outer rings, non-separable, back to back mounting
1.2300" overall width 5.9990" bore diameter cadmium exposed surfaces as mtd 0.0003 to 0.0005 in. thk except for mating surfaces, two slots on mating faces of outer ring 130 degrees apart on side opposite seal, breakout on od of inner ring opposite seal 90a universal ground faces, counterbored outer ring, non-separable
1.0236" overall width 1.1811" bore diameter inner ring eccentricity 0.0005 in., outer ring eccentricity 0.0010 in. 92c counterbored outer rings, non-separable, face to face mounting
25.00mm overall width 75.00mm bore diameter pair of bearings suitable for back to back face to face or tandem duplex mounting 90a universal ground faces, counterbored outer ring, non-separable
1.2500" overall width 6.0000" bore diameter cadmium exposed surfaces, 25 deg or less angularity 92b counterbored outer rings, non-separable, back to back mounting
32.0mm overall width 2.7559" bore diameter each bearing of set to have same serial no., v etched on outer ring, suitable for operation from minus 65 deg to plus 250 deg f 92c counterbored outer rings, non-separable, face to face mounting
30.0mm overall width 40.0mm bore diameter stabilized for operation at 250 deg f; permanently mark same serial no. on each bearing of set; lubricate 1/3 full; assy relationship marking v on od of bearing elements 92b counterbored outer rings, non-separable, back to back mounting
24.0mm overall width 2.3622" bore diameter stablized for operation at 250 deg f, assembly relationship marking v on od surface of bearing elements 92b counterbored outer rings, non-separable, back to back mounting
36.0mm overall width 40.00mm bore diameter 30 deg angularity, heat stabilized for operation at 250 f 92b counterbored outer rings, non-separable, back to back mounting
0.4900" overall width 4.1331" bore diameter part no. to be marked on face of outer race per sikorsky spec ss-8797, assembly relationship marking v on od surface of bearing, each bearing to same serial no., zero deg angularity under zero load, bore 90a universal ground faces, counterbored outer ring, non-separable
1.2300" overall width 7.9988" bore diameter lubricated 1/3 full, exposed surfaces as mtd to be cadmium plated 92b counterbored outer rings, non-separable, back to back mounting
