12.0mm overall width 17.0mm bore diameter heat stabilized from minus 65.0 deg f to plus 300.0 deg f, min seal drag, seals to conform to temp range of lubricant non-loading groove, non-separable
1.7188" overall width 1.5000" bore diameter no means for relubrication single row ball, not self-aligning, inner ring extends one side, with eccentric locking collar
0.7874" bore diameter stabilized for operation at 600 deg f, fractured outer ring w/4 retaining rings, puller groove located 0.040 to 0.060 in. from end of extended ring 0.040 in. w 26a non-loading groove, non-separable
0.6643" overall width 0.9839" bore diameter 35 to 40 percent grease filled; electric motor quality; letter j must be etched on one face of outer race non-loading groove, non-separable
14.0mm overall width 20.00mm bore diameter heat stabilized to operate at temperature up to 450 deg f, 50 pct full of specified lubricant non-loading groove, non-separable
0.1094" overall width 0.1250" bore diameter shipped dry; heat stabilized from minus 325 to plus 575 deg f; retainer impregnated with MOS2 non-loading groove, non-separable
