10.0mm overall width 17.0mm bore diameter double holding wires on each outside corners of outer ring, steel 17-4ph; bearings to be demagnetized, residual field strength not to exceed 5.0 gauss silver retainer surface treated 40c 4 point ball contact, split outer ring, spearable
Used on acft eng f100-pw-100,f100-pw-200,f100-pw-200a augmentor fuel pump. 0.5507" overall width 0.7874" bore diameter each bearing to be identified by serial no. on outer ring; balls to be visually insp w/10 power magnification prior to final assy; eddy current insp balls for cracks using a probe, no cracks are acceptable; fluorescent penetrant insp per HS447, gr v ref mil-i-6866 magnetic particle insp per HS31, cl iii ref mil-i-6868 except wet residual method may be used; surface temper insp both rings per HS972 ref mil-std-8671, surfaces shall not exhibit any evidence of surface temper; actual specific gravity value of the retainer shall be recorded for each bearing serial no counterbored outer ring, non-separable
Used on acft eng f-110. 0.5068" overall width 1.5746" bore diameter silver plate cage 0.001-0.002 thk per ams 2412, inner ring is split non-loading groove, non-separable
Used on acft eng f-101. 0.6380" overall width 1.3778" bore diameter silver plate cage 0.001-0.002 thk per ams 2412; inner ring is split non-loading groove, non-separable
