Serving our customers with quality and safety first.
cabinet, rack mtg, 11.250 in. lg, 19.000 in. w, 8.750 in. h, recordingrange, 40 db full scale, for dc recording, 0.8 to 1 v /0.8 to 1.0 ma/full scale, level recording, high freq response porm 2 db to 200 khz, dc recording, 3 db down at 8 hz, potentiometer linearity, 20, 40, 80 dbpotentiometers, porm 1 pct of full scale db value plus a freq error of 0.5db at 100 khz and 1.5 db at 200 khz, linear potentiometer, porm 1 pct offull scale, resolution porm 0.25 pct of full scale, max sensitivity 1 mvat 0 db for level recording, 0.8 or 1 v full scale for dc recording, maxinput voltage 100 v ac, input attenuator, 60 db in 10 db steps, inputimpedance, 10000 ohms for ac level recording, 1000 ohms for dc recordingpaper speeds of 2.5, 7.5, 25, 75 in./min, external dc reference, anexternal dc reference voltage of from 0.5 to 1.5 v can be appliedinternally to correct for variations of up to 3 to 1 in the signal sourceof the system under test, detector response, rms within 0.25 db formultiple sine waves, square waves, or nosie,
Indicates there is no information in the hmirs. The nsn is in a fsc in table ii of fed std 313 and a msds may be required by the user. The requirement for a msds is dependent on a hazard determination of the supplier or the intended end use of item.
Item does not contain precious metal.
Represents items with no adp components
The item does not have a critical feature such as tolerance, fit restrictions or application. nuclear hardness properties have not been determined (not valid for input).
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.
Naval inventory control point mechanicsburg, pennsylvania 17055-0788
SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.
SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.
MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.
MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category
IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.