NSN 4720-01-068-4684 NIIN 010684684 — Nonmetallic Hose Assembly

NSN
Item Name
Assigned
DEMIL
Shelf Life
UOM
Using Services
NSN:
4720-01-068-4684
4720010684684
Description:
HOSE ASSEMBLY,NONMETALLIC
NSN Assigned:
25-NOV-78
DEMIL:
NO
Shelf Life:
N/A
UOM:
1 EA
Using Services:
Navy

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

4720-01-068-4684 Specification Set by the OEM (see RNCC code 3)

Cross-sectional Shape Style AAGR:

round

Inside Diameter AARX:

2.375in.

Temp Rating ABJH:

-40.0 deg fahrenheit and 250.0 deg fahrenheit single response

Bolt Circle Diameter ABKG:

5.000in. 1st end

Flange Thickness ABKU:

0.500in. 2nd end

Outside Diameter ABKV:

2.875in.

Minimum Inside Bending Radius ACKH:

24.000in.

Exterior Color ADJS:

black

Bolt Hole Quantity AECS:

6 2nd end

Flange Outside Diameter AEPR:

6.125in. 2nd end

Connection Style AHNC:

raised swivel 2nd end

Bolt Hole Diameter AHNX:

0.562in. 2nd end

Raised Face Height AJED:

0.010in. and 0.020in. 2nd end

Raised Face Diameter AJEE:

3.281in. 2nd end

End Flange Construction AKUT:

solid 2nd end

End Connection Design AKUU:

straight 1st end

Connection Type AWLS:

raised face flange 2nd end

Features Provided CBBL:

reusable end fittings

Burst Test Pressure CQBD:

1400.0 pounds per square inch

Layer Composition And Location CQCS:

1st layer braided cotton cord and 2nd layer braided wire and outer layer molded rubber, synthetic

Maximum Operating Pressure CQGM:

350.0 pounds per square inch

Hydrostatic Test Pressure CRDW:

700.0 pounds per square inch

Flow Angle CRFY:

90.0 degrees 2nd end

Outer Covering Environmental Protection CRJM:

abrasion resistant and mildew resistant and oil resistant

Inside Surface Condition CRWL:

smooth

Measuring Method And Length CRXX:

40.812in. working

Flange Style CTCJ:

round w/ bolt holes 2nd end

Special Features FEAT:

90.0 deg hose elbow located 20.500 in.from first end

Media For Which Designed MEDA:

fuel/oil, hydrocarbon and water, fresh and water, salt single response

Cross Reference Parts Part numbers that meet the specification outlined on this page and set by the OEM

Part Number
Cage
RNCC
RNVC
DAC
RNAAC
Status
MSDS
SADC
Part Number:
FB8761-01
Cage Code:
01276
RNCC:
3
RNVC:
2
DAC:
A
RNAAC:
AX
Status:
A
MSDS:
SADC:
Part Number:
104D108-1
Cage Code:
81381
RNCC:
5
RNVC:
9
DAC:
5
RNAAC:
AX
Status:
A
MSDS:
SADC:
Part Number:
104D108-2
Cage Code:
81381
RNCC:
5
RNVC:
9
DAC:
5
RNAAC:
AX
Status:
A
MSDS:
SADC:
Part Number:
FB9480-01
Cage Code:
01276
RNCC:
5
RNVC:
9
DAC:
6
RNAAC:
AX
Status:
A
MSDS:
SADC:
Part Number:
FB8761-01
Cage Code:
1P322
RNCC:
5
RNVC:
9
DAC:
6
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
FB8761
Cage Code:
01276
RNCC:
5
RNVC:
9
DAC:
A
RNAAC:
AX
Status:
A
MSDS:
SADC:
Part Number:
FB8761
Cage Code:
01276
RNCC:
5
RNVC:
9
DAC:
A
RNAAC:
AX
Status:
A
MSDS:
SADC:
Part Number:
FB8761-01
Cage Code:
01276
RNCC:
3
RNVC:
2
DAC:
A
RNAAC:
AX
Status:
A
MSDS:
SADC:
Part Number:
104D108-1
Cage Code:
81381
RNCC:
5
RNVC:
9
DAC:
5
RNAAC:
AX
Status:
A
MSDS:
SADC:
Part Number:
104D108-2
Cage Code:
81381
RNCC:
5
RNVC:
9
DAC:
5
RNAAC:
AX
Status:
A
MSDS:
SADC:
Part Number:
FB9480-01
Cage Code:
01276
RNCC:
5
RNVC:
9
DAC:
6
RNAAC:
AX
Status:
A
MSDS:
SADC:
Part Number:
FB8761-01
Cage Code:
1P322
RNCC:
5
RNVC:
9
DAC:
6
RNAAC:
ZZ
Status:
A
MSDS:
SADC:
Part Number:
FB8761
Cage Code:
01276
RNCC:
5
RNVC:
9
DAC:
A
RNAAC:
AX
Status:
A
MSDS:
SADC:
Part Number:
FB8761-01
Cage Code:
01276
RNCC:
3
RNVC:
2
DAC:
A
RNAAC:
AX
Status:
A
MSDS:
SADC:
Part Number:
FB8761
Cage Code:
01276
RNCC:
5
RNVC:
9
DAC:
A
RNAAC:
AX
Status:
A
MSDS:
SADC:
Part Number:
104D108-1
Cage Code:
81381
RNCC:
5
RNVC:
9
DAC:
5
RNAAC:
AX
Status:
A
MSDS:
SADC:
Part Number:
104D108-2
Cage Code:
81381
RNCC:
5
RNVC:
9
DAC:
5
RNAAC:
AX
Status:
A
MSDS:
SADC:
Part Number:
FB9480-01
Cage Code:
01276
RNCC:
5
RNVC:
9
DAC:
6
RNAAC:
AX
Status:
A
MSDS:
SADC:
Part Number:
FB8761-01
Cage Code:
1P322
RNCC:
5
RNVC:
9
DAC:
6
RNAAC:
ZZ
Status:
A
MSDS:
SADC:

Identification Item Identification Guide (IIG) and Item Name Code (INC)

INC
FIIG
Concept No.
App. Key
Cond. Code
Status
INC:
20311
FIIG:
A542A0
Concept No.:
App. Key:
Cond. Code:
2
Status:
A
CROSS-SECTIONAL SHAPE STYLE ROUND style nsn 4720-01-068-4684

Definition Definition of approved item name (AIN): "HOSE ASSEMBLY,NONMETALLIC"

A length of nonmetallic hose with fittings on one or both ends. For items without fittings, see hose, nonmetallic. Excludes hose assembly, air duct; and hose assembly, air duct, air breathing.

Packaging & Dimensions Packaging instructions, special markings, and approx. weight/dims

Pack Size
Pack Weight
Item Weight
Item Dim.
Pack Size:
--
Paclk Weight:
32.2000lbs
Item Weight:
--
Item Dim:
--
Container
OPI
SPI No.
SPI Rev.
SPC Mkg.
LVL A
LVL B
LVL C
Container:
--
OPI:
O
SPI No.:
SPI Rev.:
SPC Mkg:
00
LVL_A:
Q
LVL_B:
Q
LVL_C:
LVL A Code (LVL_A) Q

Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with applicable specification for shipping container.

LVL B Code (LVL_B) Q

Packing shall be accomplished in accordance with table c.ii for the packing level specified. closure, sealing and reinforcement shall be in accordance with the appropriate shipping container specification.

Procedure Indicator Code (OPI) O

Options can be exercised as to specific method of preservation or dod approved packaging materials to be used. however, basic preservation method shall be retained, supplemental data shall be complied with, and unit package dimensions shall not be increased by more than one inch. equal or better protection shall be given the item and there shall be no increase in the package cost.

Special Markings Code (SPC_MKG) 00

No special marking.

  Packaging Codes

OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.

SPI No.: Special packaging instructions number.

LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.

SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.

4720-01-068-4684 Material Hazmat, Precious Metals, Criticality, Enviroment, and ESD

HMIC
PMIC
ESD
ENAC
ADPE
CRITL
HMIC:
N
PMIC:
U
ESD:
ESD:
ADPE:
CRITL:
X
Hazmat (HMIC) N

Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.

Precious Metals (PMIC) U

Precious metal content is unknown

Criticality X

The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.

  Identification Codes

HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.

PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.

ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.

ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.

CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.

Material Management Material categorization and source of supply

SOS
SMIC
MMAC
MCC
SOS:
SMS
SOS:
MMAC:
MCC:
Source of Supply (SOS) SMS

Defense logistics agency, enterprise business systems

  Material Codes

SOS: Source of Supply. A three position code or routing identifier code (ric), which identifies the source of supply activity.

SMIC: Special Material Indicator Code. A two position code, which categorizes material on the basis of requirements for source or quality control, technical design or configuration control, procurement, stocking and issue control, special receipt, inspection, testing, storage, or handling.

MMAC: Material Management Aggregation Code. A two position code that identifies an item of supply to be managed by a specific activity manager.

MCC: Material Echelon Code. A two position code employed by the marine corps in classifying items into categories by materiel category and procurement echelon. the alphanumeric management code is in the first position and identifies the materiel category

IMC: Denotes wether items shall be subjected to integrated management under the defense supply agency or retained by the individual military service or other department of defense components for their management. Assigned by th activity responsible for item management coding.