Serving our customers with quality and safety first.
90.0 pounds per square inch and 120.0 pounds per square inch
40, 000lb pressure, two 600w heaters, control unit, temp test meter, male and female dimpling die sets per M80251:p/n's AT252DD-3, 4, 5, 7, 8 and 9; AT252G-3 and 4; AT254DA-3, 4, 5, 6 and 8; AT254DB-8, 10 and 12; AT254DC-3, 4 and 5; AT254DD-2, 3, 4, 5, 7, 8, 9, 10 and 12; and AT254G-3 and 4
hot or cold form sheet metal to accept MS20426 and high shear rivet, MS24694 screw, camloc, airlock and druz fasteners
similar to 3448-00-559-1433 but complies to MIL-D-80251 (canc)
Packaging is in accordance with a procedural specification or a special packaging instruction (spi). the appropriate specification number will be shown in the clear in the supplemental data area.
Special requirements.
OPI: Optional Procedure Indicator Code. A one position alpha code that indicates the allowable deviations from the prescribed requirements.
SPI No.: Special packaging instructions number.
LVL A/B/C: Indicates the type of shipping container required for level A, B, or C maximum packing protection.
SPC Mkg: A two position code that identifies the special markings applied to the container, which is part of the total pack to protect the contained item during preservation, packing, storage, transit and removal from the pack.
Indicates there is no data in the hmirs and the nsn is in a fsc not generally suspected of containing hazardous materials.
Item does not contain precious metal.
Represents items with no adp components
The item does not have a nuclear hardened feature or any other critical feature such as tolerance, fit restriction or application.
HMIC: Hazardous Material Indicator Code. A one position code that identifies a hazardous item.
PMIC: Precious Metal Indicator Code. A one position code which identifies items that have precious metals as part of their content. precious metals are those metals generally considered to be uncommon, highly valuable, and relatively superior in certain properties such as resistance to corrosion and electrical conductivity.
ESD: Electrostatic Discharge. Indicates if an item is susceptible to electrostatic discharge or electromagnetic interference damage. electrostatic discharge damage occurs when an accumulation of static electricity generated by the relative motion or separation of materials is released to another item by direct contact. electromagnetic interference damage occurs when an item comes into proximity with an electrostatic or magnetic field.
ENAC: Enviromental Attribute Code. Identifies items with environmentally preferred characteristics.
CRITL: Criticality Indicator Code. Indicates an item is technically critical by tolerance, fit, application, nuclear hardness properties, or other characteristics.